Sanyo Sanyo_DP32670_P32670-01_Z5BE_[SM] free download

File name Sanyo_DP32670_P32670-01_Z5BE_[SM].pdf

SANYO Factory Code Z5BE Service Reference NO. 521 DP32670 SERVICE MANUAL 18.5" HDTV LCD ORIGINAL MFR'S VERSION A Design and specifications are subject to change without notice. IMPOTANT WARNING CAUTION: DVD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE PLAYER. (Printed on the Rear Panel) WHEN THIS PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. A1-1 SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. PERFORM A SAFETY CHECK AFTER SERVICING As for the places which need special attentions, they are indicated with the labels or seals on the Confirm that the screws, parts and wiring which cabinet, chassis and parts. Make sure to keep the were removed in order to service are put in the indications and notices in the operation manual. original positions, or whether there are the portions which are deteriorated around the 2. AVOID AN ELECTRIC SHOCK serviced places serviced or not. Check the insulation between the antenna terminal or There is a high voltage part inside. Avoid an external metal and the AC cord plug blades. electric shock while the electric current is And be sure the safety of that. flowing. (INSULATION CHECK PROCEDURE) 3. USE THE DESIGNATED PARTS 1. Unplug the plug from the AC outlet. The parts in this equipment have the specific 2. Remove the antenna terminal on TV and turn characters of incombustibility and withstand on the TV. voltage for safety. Therefore, the part which is 3. Insulation resistance between the cord plug replaced should be used the part which has terminals and the eternal exposure metal the same character. [Note 2] should be more t