acer service-manual-Acer-TravelMate-4210-4270-4670-Aspire-5620-5670 free download

File name service-manual-Acer-TravelMate-4210-4270-4670-Aspire-5620-5670.pdf

TravelMate4210/4270/4670&Aspire5620/5670 Service Guide Service guide files and updates are available on the AIPG/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN ODD disassembly & Reassembly 1. Remove the four screws securing the ODD module. 2. Remove the ODD bracket from the ODD. 3. Place the ODD bracket back to the ODD. 4. Secure the ODD with the four screw. 5. This completes ODD module disassembly and reassembly. Chapter 3 83 Main Unit Reassembly Reassembling the Mainboard, Uppercase, and Lowercase 1. Place the mainboard back to the lower case. 2. Insert the PCMCIA dummy card back to the lower case. 3. Connect the USB FFC to the USB module and latch it well. 4. Place the USB module back to the lower case. 5. Secure the USB module with one screw. 6. Connect the USB FFC to the mainboard and latch it well. 7. Connect the MDC cable to the MDC board. 8. Place the MDC board back to the mainboard. Chapter 3 84 9. Secure the MDC board with one screw. 10. Connect the speaker cable to the mainboard. 11. Aim the location of Bluetooth and wireless launch button. 12. Place the upper case back to the lower case. 13. Connect the touchpad board FFC to the mainboard and latch it well. 14. Connect the MIC wire cable to the mainboard. 85 Chapter 3 15. Reconnect the MDC cables as shown. 16. Connect the Audio DJ FFC to the mainboard. 17. Connect the LID switch cable back to the mainboard. 18. Secure the lower case with 22 screws. 19. Secure the upper case with 5 screws. Reassembling the ODD 1. Place the ODD module back to the main unit. Chapter 3 86 2. Secure the ODD module with one screw. Reassembling the LCD Module to Main Unit 1. Place the LCD module back to the main unit. 2. Put the antenna through the hole. 3. Secure the LCD module with two screws on left and right hinges. 4. Connect the LCD cable to the mainboard. 5. Place the keyboard back to the main unit. 6. Connect the keyboard FFC to the mainboard and latch it well. 7. Turn the keyboard over. 87 Chapter 3 8. Secure the keyboard with two screws. 9. Place the middle cover back to the main unit. 10. Close the notebook. 11. Secure the middle cover with three screws on the rear panel. 12. Connect the power cable to the ma