ONKYO onkyo cr-315 free download

File name onkyo_cr-315.pdf

CR-315/315DAB Ref. No. 3963 082006 SERVICE MANUAL CD RECEIVER MODEL CR-315 MODEL CR-315DAB RC-660S CR-315 for CS-315 Black and Silver models B MPP, S MPP 230V AC, 50Hz S MDC 120V AC, 60Hz CR-315 Silver model S MGT, S MGQ 220 - 230V AC, 50/60Hz S MDT 120V AC, 60Hz CR-315DAB for CS-315UK Silver model S MPB 230V AC, 50Hz SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. CR-315/315DAB SERVICE PROCEDURE-1 PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs a laser. Therefore, be sure to follow carefully Laser Diode Properties the instructions below when servicing. Material: GaAS/GaALAs WARNING!! Wavelength: 780nm SERVICE WARNING : DO NOT APPROACH THE Laser output: max. 0.5mW* LASER EXIT WITH THE EYE TOO CLOSELY. Emission Duration: continuous IN CASE IT IS NECESSARY TO CONFIRM LASER *This output is the value measured at a distance about 1.8mm BEAM EMISSION, BE SURE TO OBSERVE FROM from the objective lens surface on the Optical Pick-up Block. A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. LASER WARNING LABEL The label shown below are affixed. 1. Warning label 2. Class 1 label LUOKAN 1 "CLASS 1 LASER LASERLAITE PRODUCT" KLASS 1 LASER APPARAT SERVICE PROCEDURE 1. Replacing the fuses This symbol located near the fuse indicates that the fuse used is show operating type, For continued protection against fire hazard, replace with same type fuse , For fuse rating, refer to the