Samsung disassembly reassembly free download

File name disassembly__reassembly.pdf

3. Disassembly and Assembly 3. Disassembly and Assembly This section describes the disassembly and reassembly sequences for this monitor. Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them. 3-1. Disassembly Caution: 1. Turn the monitor off before beginning the disassembly process. 2. When disassembling the monitor, do not use any metal tools except for the provided jig. 3. Remove the signal cable and the power cord before beginning the disassembly. Description Photo Screws 1. Place monitor face down on cushioned table. Remove Stand. Caution : If you do not tilt the stand and use too much force to remove it, the connection pin may break. 2. Remove the cover and the LCD panel using the provided jig one side grooves at the bottom. Caution : Remove the cover and the LCD panel using the provided jig on both grooves at the bottom. If you disassemble the product with only one side opened, it may be damaged. 3-1 3. Disassembly and Assembly Description Photo Screws 3. Insertaflatscrewdriverintothegrooveand then lift up and remove the cover. 4. After remove COVER-REAR, then disconnect SPEAKER , FUNCTION wire. 5. Disconnect LVDS cable from panel. 3-2 3. Disassembly and Assembly Description Photo Screws 6. After disconnecting SHIELD-LAMP of left side, disassemble lamp wire between panel and IP Board. 7. Remove 8 marked SCREW of left picture. Disconnect IP board. Reassembly procedures are in the reverse order of disassembly procedures. 8. Remove the LCD panel. 3-3 3. Disassembly and Assembly Description Photo Screws Assembly 9. The assembly is in the reverse order of the disassembly. 10. Connect the disassembled snap and the LED module again. The assembly is in the reverse order of disassembly. 3-4