File information: | |
File name: | LG_ML012A_LN15A15_[SM].pdf [preview LG ML012A LN15A15 [SM]] |
Size: | 5455 kB |
Extension: | |
Mfg: | LG |
Model: | LG ML012A LN15A15 [SM] 🔎 |
Original: | LG ML012A LN15A15 [SM] 🔎 |
Descr: | LG Monitor LG_ML012A_LN15A15_[SM].pdf |
Group: | Electronics > Computer equipment > Monitors |
Uploaded: | 16-12-2019 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name LG_ML012A_LN15A15_[SM].pdf website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.html LCD TV SERVICE MANUAL CHASSIS : ML-012A MODEL : LN-15A15 CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL. CONTENTS Contents ... 2 Safety Precautions ...3 Servicing Precautions ... 4 Adjustment Instruction ...6 Troubleshooting ...12 Exploded View ... 14 Exploded View Parts List ...15 Replacement Parts List ... 16 SVC. Sheet ... SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Leakage Current Cold Check(Antenna Cold Check) With the instrument AC plug removed from AC source, An lsolation Transformer should always be used during connect an electrical jumper across the two AC plug prongs. the servicing of a receiver whose chassis is not isolated from Place the AC switch in the on positioin, connect one lead of the AC power line. Use a transformer of adequate power rating ohm-meter to the AC plug prongs tied together and touch other as this protects the technician from accidents resulting in ohm-meter lead in turn to each exposed metallic parts such as personal injury from electrical shocks. antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the It will also protect the receiver and it's components from being measured resistance should be between 1M and 5.2M. damaged by accidental shorts of the circuitary that may be Whe |
Date | User | Rating | Comment |