MITSUBISHI CT32BW1B ch W1 free download

File name CT32BW1B_ch_W1.pdf

MITSUBISHI CT-32BW 1B 1 General Information (Insufficient degaussing causes magnetisa- tion, giving an unfavourable effect on colour 1: If beam landing divergence is to be corrected in areas (a) shown in the figure, place the 3: Adjust the angle between the tabs of the 6- Pole Magnet and the "B" and "R" beans to the purity adjustment). Gum Magnet on the funnel of the CRT, on "G" beam at the centre of the screen. 3: Run the picture tube for more than thirty axis with the corner, with the white side of the 4: Make sure that purity in each colour "R","G" W1 Chassis minutes with a white raster signal applied magnet facing outwards. and "B" is maintained. If necessary repeat giving normal beam current flow. 2: If beam landing divergence is to be corrected item 1(Purity), item 2 (Screen Corner Beam 4: Make sure that all electrical adjustments have in areas (b) shown in the figure, then the Gum Landing Correction) and item 3 (Static been performed. Magnet is placed on the funnel of the CRT