Embest STDV710A free download

File name STDV710A.pdf

Embest STDV710A Evaluation Board - A Super-integrated Evaluation board for ST Microelectronic STR710FZ2T6 Microcontroller (STR710 series) - RS232, USB device, Ethernet, CAN, LCD, SPI, I2C, uCos, ... - Plenty of software examples, all in source code Embest STDV710A Evaluation Board Description The STR710F-Z2T6 is an ARM-powered microcontroller with embedded Flash and RAM. It is based on the ARM7TDMI core with low pin-count packages to aim at customers who want the power and flexibility of a 32-bit microcontroller plus an extensive range of peripheral functions and enhanced I/O capabilities. The STR710F-Z2T6 with high connectivity is using various interfaces including CAN, USB, SPI, I2C, UART, EMI (External Memory Interface) and etc. The controller is designed to target industrial control applications such as factory automation, point-of-sale and vending machines, and testing equipment, as well as mass-market telecom applications such as bridges and protocol translators. Embest STDV710ATM Evaluation Board is intended as a low cost evaluation platform for STR710F-Z2T6 1 devices. The board expands all features of STR710F-Z2T6 microcontroller and support various additional peripherals including 512k Bytes SRAM and 2M bytes flash on EMI. It integrates LEDs, buzzer, test buttons, LCD, Ethernet, CAN, SPI, I2C, USB interfaces to create a versatile stand-alone test platform. Users can fully take use of the board to meet your development requirements and applications. The Embest STDV710A Evaluation Board Kit is a complete development environment contains an evaluation board, a JTAG debugger interface and a plenty of sample programs for embedded development. Hardware Specification Dimensions: 163x124mm Working temperature: -40~+85 Celsius Processor: STR710F-Z2T6 with embedded 272kByte (256k+16k) FLASH memory and 64kByte SRAM memory Power input: +5.0V/1A 16-bit EMI SRAM: 256k 16-bit EMI Nor Flash: 1M 10M Ethernet interface (CS8900) USB2.0 full speed (12Mbs) interface CAN2.0 communication interface with CAN driver-chip UART0 and UART2 with 2 RS232 ports (can interconnect to each other for RS232 communication experiment) Serial Peripheral Interface- SPI (flash chip is able to plug in and out for replacement) II-C interface (EEPROM chip is able to plug in and out for replacement) and HDLC interface reuse 16x2 Character LCD or 128x64 Dot-matrix LCD 5 LED indicator light: one for power, one for standby, three others are general used 4 channel ADC and 1 on-board regulator (ADC experiment) 1 buzzer (PWM experiment) 1 Reset button 1 WAKE-UP button 5 general used keys 32 CPU multi-functional reused I/O expansion (HDLC, Smart Card, etc.) IAP