File information: | |
File name: | B100_038.PDF [preview B100 038] |
Size: | 13 kB |
Extension: | |
Mfg: | CANON |
Model: | B100 038 🔎 |
Original: | B100 038 🔎 |
Descr: | CANON Fax B100 B100_038.PDF |
Group: | Electronics > Consumer electronics > FAX |
Uploaded: | 10-01-2020 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name B100_038.PDF SERVICE BULLETIN FAX Issued by Canon Europa N.V. MODEL: FAX-B100 No.: B100-038 (HS-B0E-8015-01) Date: 18.07.97 LOCATION: SCNT BOARD ASS'Y MODEL NO.: H12-0273 SUBJECT: MAIN ROM UPGRADE OUTLINE The main ROM version has been upgraded from EC-13-03 to EC-16-01. 1. Main Program Version No. ORIGINAL MODIFIED Version No. EC-13-03 EC-16-01 Version No. on ROM ---- ---- Sum Check (HEX.) 0E00 E600 ROM Type MASK MASK 2. Details Local requests 1. HOME FAX (Finland, New Zealand) function made available. (Special SW8 bit2=0 1) 2. The DTMF pattern in the FINLAND and NEW ZEALAND settings has been changed. (Special SW15 bit5, 6=0 1) 3. The maximum input value for T1 in T30 has been changed to 150000ms. Other 1. Even if the image has a decode error, the operation ends normally. This problem has been corrected so that the transaction will end in error, and the designated batch transmission will be cancelled. 2. If a document that generated a direct transmission error is retransmitted without being taken out and reset, the document is not scanned, but fed through. This problem has been corrected. 3. When the error display is set to be displayed until the user presses the STOP button (ITALY, SPAIN), the fax will not go into ESS while an error is being displayed. 4. After a document has been output from memory reception, the memory becomes full. This problem has been corrected. 5. In the parallel telephone detection country setting, CI is difficult to detect. This problem has been corrected. 6. In the SAF setting, Busy Tone flse detection occurs. This detection has been changed from 2 to 5 times. 7. When programming the user ID, when numeric key 7 is pressed special German characters will be displayed. FAX -2- B100-038 8. The gamma table setting has been changed in order to suppress flecks when scanning in Auto mode. 9. Tx document gets smudged by the Tx result report, so the report printing default has been changed to ink saver mode. 10. The recovery operation every 72 hours, did not work properly when the fax was in ES mode. This problem has been corrected. (As a result, the cartridge was deteriorating, causing blank sheet output.) 11. When a reception ends in error, the OFF HOOK alarm will sound if the fax is off hooked. 12. ES |
Date | User | Rating | Comment |