Sanyo Sanyo DP32642 P32642-01 Z6TF [SM] free download

File name Sanyo_DP32642_P32642-01_Z6TF_[SM].pdf

SANYO TROUBLESHOOTING GUIDE 2012 MODELS DP32642-01 This guide is divided into 4 sections/pages depending on type of defect: page 1)No Green LED Power Light.(LED never turns"ON") page 2)Green LED Light is "ON", but Backlights are not "ON",or only turn"ON & then OFF". page 3)Green LED Light is "ON",and Backlights are "ON",but there is no video/OSD. page 4)Green LED Light turns "ON", but turns "OFF"within 10 seconds. Note: Power board and Analog board are same board, so we call it power board. Please select the section/page that matches your defect and follow the flow chart. These models & chassis versions are in this guide: DP32642-01 PLEASE KEEP THIS GUIDE. IT WILL NOT BE PROVIDED FOR EVERY REPAIR. [email protected] Repair Flow Chart:Trouble Condition Green Power LED does not turn on. The TV is dead. Green Power LED: Does not turn ON. The TV is dead. On Digital signal board: No:0v Is the "5VSTB" voltage supplied? (see TABLE*1.0) Unplug(K16A) connector on No:0v power board. On Power board: Power board is not working. Yes:5v Is the "5VSTB" voltage supplied? Replace "Power board". (see TABLE*2.0) Yes:5v Replace "digital board". While pushing the "power key sw" No voltage(0v)at K16A Pin17 or 2.9V always present. is the 2.9V from "key sw2" supplied to "K16A Pin17"? (see TABLE*3.0) Power board was broken. Replace "Power board". Yes Digital board is not working. Replace "digital board". (TABLE *1.0)Digital board:5VSTB Test Points 32" Models 5VSTB on Digital board Confirmation Voltage DP32642-01 Z6TF Digital K5A Pin3 or Pin4 5V (TABLE *2.0) Power board:5VSTB Test Points 32" Models 5VSTB on Power board Confirmation Voltage DP32642-01