CANON Canon Staple Finisher-V2 Booklet Finisher-V2 Rev.2.0 [X] free download

File name Canon_Staple_Finisher-V2_Booklet_Finisher-V2_Rev.2.0_[X].pdf

Revision 2.0 Staple Finisher-V2/Booklet Finisher-V2 Service Manual Introduction Introduction Important Notices Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality. Corrections This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual. The following paragraph does not apply to any countries where such provisions are inconsistent with local law. Trademarks The product names and company names used in this manual are the registered trademarks of the individual companies. Copyright This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the consent of Canon Inc. Copyright CANON INC. 2016 Caution Use of this manual should be strictly supervised to avoid disclosure of confidential information. Explanation of Symbols The following symbols are used throughout this Service Manual. Symbols Explanation Symbols Explanation Check. Remove the claw. 1x Check visually. Insert the claw. 1x Check a sound. Push the part. Introduction Symbols Explanation Symbols Explanation Disconnect the connector. Connect the power cable. 1x Connect the connector. Disconnect the power cable. 1x Remove the cable/wire from the