LG LG 60PY2DR 60PX4DR 50PY2DR 50PX4DR 50PC1DR 50PC1DRA 2006 PDP training [TM] free download

File name LG_60PY2DR_60PX4DR_50PY2DR_50PX4DR_50PC1DR_50PC1DRA_2006_PDP_training_[TM].pdf

TRAINING MANUAL PLASMA DISPLAY PANELS - 2006 MODELS COVERED: 60PY2DR 60PX4DR 50PY2DR 50PX4DR 50PC1DR 50PC1DRA Service Digital Display IMPORTANT SAFETY NOTICE The information in this training manual is intended for use by individuals possessing an adequate background in electrical equipment, electronic devices, and mechanical systems. In any attempt to repair a television or monitor, personal injury and property damage can result. The manufacturer or seller maintains no responsibility for the interpretation of this information, nor can it assume any liability in connection with its use. When servicing this product, under no circumstances should the original design be modified or altered without permission from LG Electronics. Unauthorized modifications will not only void the warranty, but may lead to property damage or user injury. If wires, screws, straps, clips, nuts, or washers used to complete a ground path are removed for service, they must be returned to their original position and properly fastened. CAUTION To avoid personal injury, disconnect power before servicing this product. If electrical power is required for diagnosis or test purposes, disconnect the power immediately after performing the necessary checks. Also be warned that many household appliances present a weight hazard. At least two people should be involved in the installation or servicing of such devices. Failure to consider the weight of an appliance could lead to physical injury. ESD NOTICE Some of the electronics in appliances are electrostatic discharge (ESD) sensitive. ESD can weaken or damage the electronics in these appliances in a manner that renders them inoperative or reduces the time until their next failure. Connect a wrist strap to a green ground connection point or unpainted metal in the appliance. Alternatively, you may touch your finger repeatedly to a green ground connection point or unpainted metal in the appliance. Before removing a replacement part from its package, touch the anti-static bag to a green connection point or unpainted metal in the appliance. Avoid unnecessary contact with electronic parts or terminal contacts. Handle the electronic control assembly by its edges only. When repackaging a failed electronic control assembly in an anti-static bag, observe the above instructions. REGULATORY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in