Intel Intel 386 Model 302 Board Technical Reference Jan90 free download

File name Intel_386_Model_302_Board_Technical_Reference_Jan90.pdf

Intel386TM MicroComputer Model 302 Board Technical Reference . Manual Order Number: 505067-002 Revision F WARNING This equipment has been tested with a Class B computing device and has been found to comply with the limits for a class B computing device, pursuant to subpart J of part 15 FCC rules. Only peripherals (computer inpuVoutput devices, terminals, printers, etc.) which comply with the class B limits may be attached to this computer product. Operation with non- compliant peripherals is likely to result in interference to radio and 1V reception. All cables used to connect to peripherals must be shielded and grounded. Operation with cables, connected to peripherals, which are not shielded and grounded may result in interference to radio and 1V reception. This equipment meets or exceeds requirements for safety in the US (UL 478 5th Edition), Canada (CSA C22.2 No. 220), and Europe (IEC 380, IEC 435, IEC 950, and VDE 0806). This equipment has been tested for radio frequency emissions and has been verified to meet VDE 0871 Class B. This digital apparatus does not exceed the Class B limits for radio noise emissions set out in the radio interference regulations of the Canadian Department of Communications. Ce dispositif digital, s'il est utilise suivant les instructions et recommandations du constructeur, ne depasse pas les limites de la Classe B pour Ie bruit des frequences radio, etablies par les Regles sur I'interference radio du Ministere Canadian des Communications. ii RADIO FREQUENCY INTERFERENCE NOTICE This equipment generates and uses radio frequency energy and if not installed properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type-tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 FCC rules, which are designed to provide reasonable protection against interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: