PACKARD BELL easynote w3 dragon a free download

File name easynote w3 dragon a.pdf

Packard Bell EasyNote W3 Series (Dragon A) Disassembly Manual 0 Table of Contents Overview 1 Disassembly Instructions 1 Reassembly Instructions 1 Required Tools 1 Hazardous Voltage 2 Avoid Electrostatic Discharge 2 Power Supply Unit 2 Battery and AC Adapter 4 Removing the Hard Disk Drive 4 Bottom Panel 5 CPU and Fan 6 Top Cover 6 Removing the LCD Panel 8 Disassembling the LCD Panel 8 Optical Disk Drive 10 Bottom Base Assembly 11 Top Cover 12 Main Board Assembly 12 Notice 15 1 Overview This document contains step-by-step disassembly instructions for the EasyNote W3 (Dragon A) chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Packard Bell reserves the right to make changes to the chassis without notice. Disassembly Instructions When disassembling the system unit, follow these general rules: n Turn off the power. n Disconnect the AC adapter. n Remove the battery. n Do not disassemble the system into parts that are smaller than those specified in the instructions. n Label all removed connectors; note where the connector goes and in what position it was installed. Reassembly Instructions Reassembly is the reverse of the disassembly process. Use care to ensure that all cables and screws are returned to their proper positions. Check that no tools or any loose parts have been left inside the chassis. Check that everything is properly installed and tightened. Required Tools All disassembly procedures can be performed using the following tools: n Philips (#2 bit) screwdriver n Hex bolt screwdriver 2 Hazardous Voltage Power Supply Unit There is hazardous voltage present inside the Under no circumstances should you computer when it is connected to an AC attempt to disassemble the power supply, even when the computer' power s supply. The power supply contains switch is off. Exposure to hazardous voltage no user-serviceable parts. Inside the could cause personal injury. To avoid risk of power supply are hazardous injury, contact an Authorized Service Provider voltages that can cause serious for proper (un)installation of optional personal injury. Always return a hardware devices. defective power supply to your dealer.