Icom IC7000 free download

File name IC7000.pdf

SERVICE MANUAL HF/VHF/UHF ALL MODE TRANSCEIVER S-14214HZ-C1 Dec. 2005 INTRODUCTION DANGER This service manual describes the latest service information NEVER connect the transceiver to an AC outlet or to a DC for the IC-7000 HF/VHF/UHF ALL MODE TRANSCEIVER power supply that uses more than 16 V. Such a connection at the time of publication. could cause a fire or electric hazard. VER.NO. VERSION SYMBOL DO NOT expose the transceiver to rain, snow or any liquids. #02 Europe EUR #03 France FRA DO NOT reverse the polarities of the power supply when #04 Spain ESP connecting the transceiver. #05 U.S.A. USA #08 Export EXP DO NOT apply an RF signal of more than 20 dBm (100 mW) #10 United Kingdom UK to the antenna connector. This could damage the trans- ceiver's front end. To upgrade quality, all electrical or mechanical parts and internal circuits are subject to change without notice or obligation. ORDERING PARTS REPAIR NOTES Be sure to include the following four points when ordering 1. Make sure the problem is internal before disassembling replacement parts: the transceiver. 2. DO NOT open the transceiver until the transceiver is 1. 10-digit Icom parts number disconnected from its power source. 2. Component name and informations 3. DO NOT force any of the variable components. Turn 3. Equipment model name and unit name them slowly and smoothly. 4. Quantity required 4. DO NOT short any circuits or electronic parts. An insulated turning tool MUST be used for all adjustments. 5. DO NOT keep power ON for a long time when the transceiver is defective. 5030002820 LCD LTA025A161A IC-7000 Front unit 5 pieces 6. DO NOT transmit power into a signal generator or a 8810009610 Screw FH M2.6