Samsung 13 Disassembly & Reassembly free download

File name 13_Disassembly & Reassembly.pdf

Disassembly & Reassembly 12. Disassembly & Reassembly 12-1 Overhaul Disassembly & Reassembly 12-1-1 Disassembling the Cabinet Part Name Description Description Photo Back Remove the 4 screws fixing the Back Cover. Cover : SWRCH18A,M4,L20,RH,+,2S,-,Z Remove the 1 screws fixing the Main and T/Board. : RH,+,B,M4,L15,ZPC(BLK) Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit. : Disassemble the product after disconnecting the power cord and discharge the unit to prevent an electric shock and damage to the product due to static electricity. Samsung Electronics 12-1 Disassembly & Reassembly 12-1-2 Disassembling the CRT and Chassis Part Name Description Description Photo Chassis Separate the Ass'y Holder chassis from the Front Cabinet. Holder Pull the Chassis Holder lifting the fixing clip up. : Pulling the Chassis Holder by force may damage the clip or the connector. Pull the Chassis Holder just until the clip comes off the hole. Pull the chassis while raising the clip fixing the Front Cabinet and the Holder Chassis. Main Board Separate the Speakers, the Speaker Wire, the D-Coil Master Wire, and the Remote Control Sensor Cable from the Front Cabinet and the System Board. Separate the wire from the Wire pressing the at. : Since there is a clip to connect the Connector Header in the Wire Connector, pulling it by force may damage the clip or the connector. Press the clip down completely and pull the connector. Separate theAV and Main Board from the Front Cabinet and AV Wire, GT-Pin Wire. To separate the Wire, Fixing clip and pressing the Wire. Separate the 7P, 8P Wire connecting the DY Wire and the CRT PCB. To separate the Wire, Fixing clip and pressing the Wire. 12-2 Samsung Electronics Disassembly & Reassembly Part Name Description Description Photo CRT Board Remove the CRT. Separate the TBC Wire,GND,VM cables from the