Icom IC756PRO free download

File name IC756PRO.pdf

SERVICE MANUAL HF/50MHz ALL MODE TRANSCEIVER i756PRO INTRODUCTION DANGER This service manual describes the latest service information NEVER connect the transceiver to an AC outlet or to a DC for the IC-756PRO HF/50MHz ALL MODE TRANSCEIVER. power supply that uses more than 16 V. This will ruin the transceiver. DO NOT expose the transceiver to rain, snow or any liquids. MODEL VERSION SYMBOL DO NOT reverse the polarities of the power supply when U.S.A. USA conecting the transceiver. IC-756PRO Europe EUR DO NOT apply an RF signal of more than 20 dBm (100 mW) France FRA to the antenna connector. This could damage the transceIer's front end. To upgrade quality, any electrical or mechanical parts and internal circuits are subject to change without notice or obligation. ORDERING PARTS REPAIR NOTES Be sure to include the following four points when ordering 1. Make sure a problem is internal before disassembling the replacement parts: transceiver. 2. DO NOT open the transceiver until the transceiver is 1. 10-digit order numbers disconnected from its power source. 2. Component part number and name 3. DO NOT force any of the variable components. Turn 3. Equipment model name and unit name them slowly and smoothly. 4. Quantity required 4. DO NOT short any circuits or electronic parts. An insu- lated tuning tool MUST be used for all adjustments. 5. DO NOT keep power ON for a long time when the trans- ceiver is defective. 1110000960 S.IC NJM4558M IC-756PRO MAIN UNIT 5 pieces 6. DO NOT transmit power into a signal generator or a 8810005770 Screw BiH M3