LG LG Plasma Panel PDP50X4 [SM][DS] free download

File name LG_Plasma_Panel_PDP50X4_[SM][DS].pdf

Product Specification of PDP Module CUSTOMER APPROVAL SPECIFICATION Title PDP50X4#### (50" WXGA PDP MODULE) Buyer Name Dong Bang Supplier LG Electronics Inc. Model Model Name 50X4 Name PART No. PART No. Signature / Date Signature / Date Approved by Approved by Please return 1 copy for our confirmation PDP Engineering Department With your signature PDP Division LG Electronics Inc. Confidential Revision No. 00 Product Specification of PDP Module Record of Revisions Revision Effective Comments No. Date Confidential Revision No. 00 Product Specification of PDP Module 0. Warnings and Cautions WARNING indicates hazards that may lead to death or injury if ignored. CAUTION indicates hazards that may lead to injury or damage to property if ignored. WARNING 1) This product uses a high voltage (450 V max.). Do not touch the circuitry of this product with your hands when power is supplied to the product or immediately after turning off the power. Be sure to confirm that the voltage is dropped to a sufficiently low level. 2) Do not supply a voltage higher than that specified to this product. This may damage the product and may cause a fire. 3) Do not use this product in locations where the humidity is extremely high, where it may be splashed with water, or where flammable materials surround it. Do not install or use the product in a location that does no satisfy the specified environmental conditions. This may damage the product and may cause a fire. 4) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off the power. Continuing to use the products it may cause fire or electric shock. 5) If the product emits smoke, an abnormal smell, or makes an abnormal sound, immediately turn off the power. If noting is displayed or if the display goes out during use, immediately turn off the power. Continuing to use the product as it is may cause fire or electric shock. 6) Do not disconnect or connect the connector while power to the product is on. It takes some time for the volt