Samsung 225MW[1] free download

File name 225MW[1].pdf

10 Operating Instructions and Installation 10 Operating Instructions and Installation 10-1 Front 1. AUTO button 6. Source (Available in Analog mode only) Activates a highlighted menu item. / When the 'AUTO' button is pressed, the Auto Push the 'SOURCE', then selects the video Adjustment screen appears as shown in the signal while the OSD is off. (When the animated screen on the center. SOURCE button is pressed to change the input Press to self-adjust to the incoming Analog mode, a message appears in the upper left of signal. The values of fine,coarse and position the screen displaying the current mode -- PC, are adjusted automatically. DVI, HDMI, AV, S-Video and Component input signal.) 2. IP - Available in PC/DVI Mode In PC mode, turns on Video or TV screens in 7. Remote Control Sensor PIP mode. Aim the remote control towards this spot on the monitor. 3. Moves from one menu item to another vertically 8. Power button or adjusts selected menu values. Turns the monitor On/Off. In TV mode, selects TV channels. 9. Power indicator 4. -+ Power indicator shows PowerSaver mode by Moves from one menu item to another green blinking. horizontally or adjusts selected menu values. Adjusts the audio volume. 10. Speaker You can hear sound by connecting the 5. MENU soundcard of your PC to the monitor. Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 10-1 10 Operating Instructions and Installation 10-2 Rear (The configuration at the back of the monitor may vary from product to product.) 1. POWER POWER : Connect the power cord for your monitor to the POWER on the back of the monitor. 2. DVI/PC IN / HDMI/PC/DVI-D AUDIO IN 1. PC : Connect the RGB terminal at the back of your monitor to your computer. 2. DVI-D