Samsung Disassembly & Reassembly free download

File name Disassembly & Reassembly.pdf

3. Disassembly and Assembly 3. Disassembly and Assembly This section describes the disassembly and reassembly sequences for this monitor. Warning: As this monitor has parts that are sensitive to static electricity, be careful when handling them. 3-1. SIMPLE STAND Disassembly Caution: 1. Turn the monitor off before beginning the disassembly process. 2. Disassemble the monitor carefully as directed in the following procedures. 3. When disassembling the monitor, do not use any metal tools except for the provided jig. Description Photo Screws 1. Place a soft cloth on the table and place the monitor onto it with the front part facing downwards. Hold the monitor set with one hand and hold and pull the stand body backwards with the other hand to remove the stand body from the monitor set. Caution : : If you do not tilt the stand and use too much force to remove it, the connection pin may break. 2. Turn the monitor over and insert your hands into the top of the monitor at the center and separate the front cover in the direction of the arrow as shown in the figure. Separate the sides of the front cover up to the directed line as shown in the figure. 3. Turn the monitor over again to remove the back cover. 3-1 3. Disassembly and Assembly Description Photo Screws 4. Remove the SHIELD-LAMP using the provided JIG. Caution: The SHIELD-LAMP is sharp. 5. Remove the LVDS, LAMP wire, FUNCTION cable, and SPEAKER cable, and then remove LVDS the SHIELD-COVER. LAMP WIRE FUNCTION 6. Remove the LCD panel.. 7. Remove the four (4) screws shown in the figure. 8. Remove the four (4) screws shown in the figure and remove the Bracket support. 3-2 3. Disassembly and Assembly Description Photo Screws 9. Remove the main PCB and IP boards from the SHIELD-cover. The assembly is in the reverse order of disassembly. 3-3 3. Disassembly and Assembly 3-2. HAS STAND Disassembly Description Photo Screws 1. If the Stopper PIN at the back of the stand