PACKARD BELL easynote l free download

File name easynote l.pdf

Packard Bell EasyNote L Disassembly Manual 1 Table of Contents Overview 2 Technician Notes 2 Disassembly Instructions 2 Reassembly Instructions 2 Required Tools 2 Hazardous Voltage 3 Avoid Electrostatic Discharge 3 Power Supply Unit 3 Removing the Battery 4 Removing the Memory Module 4 Removing the Hard Disk Drive 5 Removing the Keyboard 5 Removing the Optical Disk Drive 7 Removing the LCD Module 7 Removing the LCD Panel 9 Removing the CPU 9 Removing the Top Cover 11 Removing the Touchpad 12 Removing the Chipset Heat Sink 13 Removing the WLAN Card 13 Removing the MDC Modem 14 Removing the Main Board 14 Notice 16 Packard Bell EasyNote L Disassembly Manual 2 Overview This document contains step-by-step service instructions for the EasyNote L. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Packard Bell reserves the right to make changes to the EasyNote L without notice. Technician Notes Only technicians authorized by NEC Computers International B.V. should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modifications may void any warranty or exchange allowances. Disassembly Instructions When disassembling the system unit, follow these general rules: n Turn off the power and disconnect all cables and peripherals