DE`LONGHI disassembly MX270 free download

File name disassembly MX270.pdf

Spares - MX270 Disassembly & re-assembly instructions Page 1 of 8 MX270 The following procedures are aimed to help with dismantling and service repairs. Always disconnect the appliance from mains supply prior to removal of the covers and suitably protect the finish on the casings. Click on the pictures to open a larger version in a seperate window. The vent cover is secured internally by 3 screws. To remove the planet hub: Align the hub as shown. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 2 of 8 Remove the hex screw, and lift the hub straight off. Internal view of hub assembly. To access the power unit: *it will be necessary to remove the pedestal assembly to gain access to the power unit Turn machine upside down. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 3 of 8 Remove the 2 screws highlighted by the arrows. Lift off the pedestal assembly. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 4 of 8 Remove the locating pin, then use a small flat screwdriver to dislocate the lugs of the headlift latch. Please note the correct position of the spring prior to removal. Then remove the 3 screws at the rear of the power unit. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 5 of 8 Remove the four screw caps and screws beneath. *it is not necessary to remove the hub at this stage Turn the power unit upright and lift off the top cover. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 6 of 8 Speed control PCB wiring. Please note the correct position of the 3 tie wraps. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 7 of 8 Main PCB wiring. Speed control switch and lever assembly. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009 Spares - MX270 Disassembly & re-assembly instructions Page 8 of 8 Click here to return to the top of the page. Back. http://www.kenwoodservice.co.uk/product-files-kar/guide_MX270.htm 30/04/2009