Tektronix 13 inst free download

File name 13_inst.PDF

Changing Instrument Settings This section describes how to change the date and time settings, printer settings, and the GPIB and RS-232 parameters. This section describes how to display a screen that details the CTS850 SDH/PDH Test Set configuration. You will also find a description of how to run the instrument self-test in this section. Viewing the Instrument Configuration You can display a page that describes how the CTS850 is configured as well as the installed options and the hardware and firmware revision level. To display the instrument configuration: Press Menu Select Menu Highlight Button Page Parameter Select Choice UTILITY INSTR CONFIG none none Table 3 48 describes the lines of the INSTR CONFIG page. Table 3 48:Lines of the Instrument Configuration Page Line Description Model The model number of the instrument. Serial Number The serial number of the instrument. Hardware Revision The version of hardware. Option Revision The version of options. Firmware Revision The version of firmware. Options Lists the options and number of options CTS850 SDH/PDH Test Set User Manual 3 261 Changing Instrument Settings Table 3 48:Lines of the Instrument Configuration Page (Cont.) Line Description Interface Module Displays which interface module is installed (supported transmit and receive rates) and wavelength of module, if optical. PDH Option Indicates whether the 2/8/34/45/140 Mb/s Mux/Demux options are installed. Jitter Option Indicates whether Jitter/Wander Option is installed VC4 4c BER test of Concatenated STM 4c signal Setting the Display Brightness You can set the display brightness to three levels: Low, Medium, and High. To set the display brightness: Press Menu Select Menu Highlight Button Page Parameter Select Choice UTILITY MISC SETTINGS Display Low (see Figure