PACKARD BELL easy lite versa lite free download

File name easy lite versa lite.pdf

Product: Packard Bell Easy Lite NEC/ZDS Versa Lite SYSTEM DISASSEMBLY INSTRUCTIONS Before starting the disassembly take notice of the ESD warning below. Warning! All the components in the computer can be damaged by static electricity (E.S.D. - Electro Static Discharge). Discharge yourself and any tool you use to ground (e.g. computer chassis) before touching or removing a component. Place removed components in anti- static bags. Battery and Hard Disk Drive Removal 1- Turn over the unit, unlatch the battery by shifting the two clips (Picture below, Item A) and remove it. 2- Instructions for removing the hard disk drive: a- Remove the two screws (Picture below, Item B) of the hard disk cover. Disassembly/re-assembly instructions Easy Lite / Versa Lite Packard Bell NEC Europe, version 1.0, 18-05-99, Page 1 of 13, MS b- Take off the hard disk drive (HDD) cover. c- Lift the drive out and carefully disconnect the flatcable and take away the drive. d- Disconnect the HDD flatcable from the mainboard by removing the caution label with a pair of tweezers and carefully unlocking the cable. Disassembly/re-assembly instructions Easy Lite / Versa Lite Packard Bell NEC Europe, version 1.0, 18-05-99, Page 2 of 13, MS Removing the Keyboard 1- Remove the two screws at the corner of the base (location shown in the picture). 2- Turn over the unit, open the LCD panel and remove the two hinge caps by shifting them sidewards. Disassembly/re-assembly instructions Easy Lite / Versa Lite Packard Bell NEC Europe, version 1.0, 18-05-99, Page 3 of 13, MS 3- Lift the keyboard a little with a flatbed screwdriver and unlock the three spring latches between the and keys, the and keys, and the and keys. 1- Unlock the connector, free the keyboard cable and take away the keyboard. Disassembly/re-assembly instructions Easy Lite / Versa Lite Packard Bell NEC Europe, version 1.0, 18-05-99, Page 4 of 13, MS Taking Off the LCD Panel 1- Remove the five screws that secure the speaker cover. 2- Remove the speaker cover. 3- Remove the harness cap that covers the cable leading from the mainboard to the LCD panel (see picture). You may want to use a flatbed screwdriver. Disassembly/re-assembly instructions Easy Lite / Versa Lite