Now downloading free:Samsung 03 Alignment & Adjustment
Samsung 03 Alignment & Adjustment free download
DVD player, DVD recorder, digital recorder, DVD R - Sony, Panasonic, LG - service manual and repair information| File information: | |
| File name: | 03_Alignment & Adjustment.pdf [preview 03 Alignment & Adjustment] |
| Size: | 3180 kB |
| Extension: | |
| Mfg: | Samsung |
| Model: | 03 Alignment & Adjustment 🔎 |
| Original: | 03 Alignment & Adjustment 🔎 |
| Descr: | Samsung DVD DVD-P242 03_Alignment & Adjustment.pdf |
| Group: | Electronics > Consumer electronics > DVD |
| Uploaded: | 09-03-2020 |
| User: | Anonymous |
| Multipart: | No multipart |
| Information about the files in archive: | ||||||
| Decompress result: | OK | |||||
| Extracted files: | 1 | |||||
File name 03_Alignment & Adjustment.pdf
2. Alignment and Adjustment 2-1 Location of Test Point Pin 29 of RIC1 Fig. 2-1 Location of Test Point (DVD-P242/P243M Only) Samsung Electronics 2-1 Alignment and Adjustment Pin 29 of RIC1 Fig. 2-2 Location of Test Point (DVD-P343/P346/P347/P348/P3636 Only) 2-2 Samsung Electronics Alignment and Adjustment 2-2 Skew Adjustment 2-2-1 Adjustment Spec. and Test Point Test Disc ; Service not Available Test Disc Adjustment Spec. Test Point Adjustment Location TDV-533 "Pin 29 of RIC1" Screw A / B Chapter 14 Flat Waveform (Main PCB - Component Side) Ass'y Deck - Top Side (See Fig. 2-1, 2-2) (See Fig. 2-3) Fig. 2-3 Ass'y Deck (Top Side) Samsung Electronics 2-3 Alignment and Adjustment 2-2-2 SKEW Adjustment Method Needed to minimize the variations in Skew of the Pickup unit and to provide optimum match with the recorded signal on the Disc. 1) Connect an Oscilloscope to the "Pin 29 of RIC1" Test Point (See Fig. 2-1, 2-2). 2) Connect Power, Open the Tray and Play the Ch.14 which is in the TDV-533 Disc. Set the Oscilloscope Range as follows : (Voltage ; 20mV/Div., Frequency ; 10m Sec.) 3) Adjust the Screws "A" and "B" (See Fig. 2-3) using a Hex screwdriver until you obtain a Flat Waveform and the picture is stable. Then, go to Chapter 1 and make sure the Waveform is Flat here as well. If not, you have to go back to Chapter 14 and adjust again. If you cannot obtain a Flat waveform, then the unit is defective. Note : The Deck must be in a horizontal position. Use both "A" and "B" screws to adjust. Typical Waveform before Adjustment Waveform after Correct Adjustment Fig. 2-4 Envelope Waveform 2-4 Samsung Electronics >> View document online << >> Download document <<  Was this file useful ? Share Your thoughts with the other users. User ratings and reviews for this file:
Average rating for this file: 0.00 ( from 0 votes) Similar Service Manuals : Samsung 03 Reference Information - Samsung 20080111095649656 updatemanual - Samsung DVD-HR733XEH.part1 - Samsung DVD-VR320[1].part1 - Samsung DVD-518 - Samsung DVD-HR733XEH.part4 - Samsung DVD-L100W[1].part1 - | ||||||