Samsung Disassembly & Reassembly free download

File name Disassembly & Reassembly.pdf

3. Disassembly and Assembly 3. Disassembly and Assembly This section describes the disassembly and reassembly sequences for this projector. Warning: As this projector has parts that are sensitive to static electricity, be careful when handling them. 3-1. Disassembly Caution: 1. Turn the projector off before beginning the disassembly. 2. Carefully disassemble the projector as described in the following procedures. 3. When disassembling the projector, do not use any metal tools except for the provided jig. Sequence Item Description Photo Screws Remove the projection lens cover at the front of the projector by pressing the left and right hooks. 1 Caution : Make sure to proceed with the disassembly after the power is disconnected. Remove the two (2) screws at the 2 left and right of the back of the product Removing the Cover Top Lift the hook at the center of the back of the product. Loosen the hooks at the sides of 3 the product cover (they can be loosened easier by pressing the left and right sides) and lift the cover. Be careful of damage to the projection lens. Loosen the hook at the front of the cover and lift the 4 cover. Caution :Be careful of damage to the touchpad cable. 3-1 3. Disassembly and Assembly Sequence Item Description Photo Screws Remove the two (2) screws at the top left and right of the rear panel 5 of the projector. Remove the screw (1) at the front of the rear panel of the projector. Removing the rear panel Remove the connection cable for SMPS from the inlet attached to 6 the rear panel of the projector and remove the screw (1) for the GND