File information: | |
File name: | Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3.rar [preview Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3] |
Size: | 1277 kB |
Extension: | rar |
Mfg: | TOSHIBA |
Model: | Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3 🔎 |
Original: | Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3 🔎 |
Descr: | TOSHIBA TV Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3.rar |
Group: | Electronics > Consumer electronics > TV |
Uploaded: | 28-03-2020 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Toshiba 21T01 21R01 14T01 14R01 Samsung KS1A[1].part3.rar FILE NO. 050-200126 SERVICE MANUAL COLOUR TELEVISION 21T01F, 21R01F 21T01B, 14R01F 14T01B, 14R01B 21T01N, 21T01I 21T01D, 14T01N 14T01I, 14T01D PRINTED IN U. K TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN Precautions 1. Precautions Follow these safety, servicing and ESD precautions to prevent damage and protect against potential hazards such as electrical shock and X-rays. 1-1 Safety Precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missing (READING SHOULD NOT BE ABOVE protective shields. DEVICE LEAKAGE CURRENT 0.5mA) UNDER TESTER TEST 2. When reinstalling the chassis and its TEST ALL assemblies, be sure to restore all protective EXPOSED METAL SURFACES devices, including: nonmetallic control knobs 2-WIRE CORD and compartment covers. ALSO TEST WITH PLUG REVERSED 3. Make sure that there are no cabinet openings (USING AC ADAPTER EARTH PLUG AS REQUIRED) GROUND through which people--particularly children--might insert fingers and contact dangerous voltages. Such openings include Fig. 1-1 AC Leakage Test the spacing between the picture tube and the cabinet mask, excessively wide cabinet 6. Antenna Cold Check: ventilation slots, and improperly fitted back With the unit's AC plug disconnected from the covers. AC source, connect an electrical jumper across the two AC prongs. Connect one lead of the If the measured resistance is less than 1.0 |
Date | User | Rating | Comment |