Samsung tx14n34xxeu free download

File name tx14n34xxeu.rar

Alignment and Adjustments (Electrical) 4. Alignment and Adjustments (Electrical) 4-1 Preadjustment 4-1-1 Factory Mode 4-1-3 When CRT Is Replaced 1. Do not attempt these adjustments in the Video Make the following adjustments after setting up Mode. purity and convergence: 2. The Factory Mode adjustments are necessary White Balance when either the EEPROM (IC902) or the CRT Sub-Brightness is replaced. Vertical Center Vertical Size 3. Do not tamper with the "Adjustment" screen Horizontal Size of the Factory Mode menu. This screen is intended only for factory use. 4-1-2 When EEPROM (IC902S) Is Replaced 1. When IC902 is replaced all adjustment data revert to initial values. It is necessary to re- program this data. 2. After IC902 is replaced, warm up the TV for 10 seconds. 4-2 Factory ("Service") Mode 4-2-1 Procedure for the "Adjustment" Mode 1. This mode uses the standard remote control. 4. Selection sequences for the The Service Mode is activated by: (1) pressing PAL/SECAM B/G, L/systems: the "FACTORY" service key on the local-key- board, or (2) by entering the following remote- down or up key: control sequence (within 2 seconds): AGC>TXP>AFW>SBT>SCT>SCR>STT>RG> GG>BG>TCT>SC>SL>PVS>PHS>NVS> STAND-BY DISPLAY MENU MUTE NHS>CDL>BKS POWER ON 5. The VOLUME keys increase or decrease the 2. The "SERVICE (FACTORY)" message will be adjustment values, (stored in the displayed. The Service Mode has three compo- non-volatile memory) when Adjustment Mode nents: Adjustment, Option and Reset. is cancelled. 3. Access the Adjustment Mode by pressing the "VOLUME" keys ( Up or Down). The adjust- ment parameters are listed in the accompany- ing table, and selected by pressing the CHAN- NEL keys (L,M). Samsung Electronics 4-1 Alignment and Adjustments (Electrical) 4-2-2 Main Adjustment Parameters OSD ABBREVIATION RANGE INITIAL DATA AGC 63 28 XP 7 5 QSS 1 1 SBT 23 6 SCT 23 10 SCR 13