Sony MDS-PC3 free download

File name sony_MDS-PC3_service_manual.pdf

MDS-PC3 SERVICE MANUAL US Model Canadian Model AEP Model UK Model E Model Photo: SILVER US and foreign patents licensed form Dolby Laboratories Licensing Corporation. Model Name Using Similar Mechanism MD Mechanism Type Optical Pick-up Type MDS-JE640 MDM-7A KMS-260B/J1N SPECIFICATIONS System Disc Laser Laser output MiniDisc digital audio system MiniDisc Semiconductor laser ( = 780 nm) Emission duration: continuous Less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Material: GaAlAs 400 rpm to 900 rpm Advanced Cross Interleave Reed Solomon Code (ACIRC) 44.1 kHz Adaptive Transform Acoustic Coding (ATRAC) EFM (Eight-to-Fourteen Modulation) 2 stereo channels 5 to 20,000 Hz ±0.5 dB Over 94 dB during playback Below measurable limit General Where purchased U.S.A. and Canada Other countries Power requirements* 120 V AC, 60 Hz 220 ­ 230 V AC, 50/60 Hz * Using an AC power adaptor (supplied) Power consumption Dimensions (approx.) 7W 152 Ч 52 Ч 255 mm (6 Ч 2 1/8 Ч 10 1/8 inches) (w/h/d) incl. projecting parts and controls 1.0 kg (2 lb 4 oz) Laser diode Revolutions (CLV) Error correction Sampling frequency Coding Modulation system Number of channels Frequency response Signal-to-noise ratio Wow and flutter Mass (approx.) Supplied accessories · AC power adaptor (1) · Audio connecting cord (stereo mini-plug Ч 1 y stereo mini-plug Ч 1) (1) · Optical cable (1) · Remote commander (remote) RM-D52M (1) · PC connecting kit PCLK-MN10* (1) * Required for operation by personal computer. For details, refer to the operating instructions supplied with the PCLK-MN10. Inputs LINE (ANALOG) IN Jack type: stereo-mini Impedance: 47 kilohms Rated input: 500 mVrms Minimum input: 125 mVrms DIGITAL (OPTICAL) IN Connector type: square optical Impedance: 660 nm (optical wave length) Outputs LINE (ANALOG) OUT (VARIABLE) Jack type: stereo-mini Rated output: 1 Vrms (at 50 kilohms) Load impedance: Over 10 kilohms DIGITAL (OPTICAL) OUT Connector type: square optical Rated output: ­18 dBm Impedance: 660 nm (optical wave length) PHONES Jack type: stereo-mini Rated output: 5 mW Load impedance: 32 ohms MINIDISC DECK *Note: As this unit has only a few buttons, one button is assigned with several functions in the test mode." Press the z button, AMS knob to switch the functions. · Each time the z button is pressed, the display switches in the follwing order, "PGM" t "blank" t "PGM" t ­. · Rotate the AMS knob and the display switches in the following order, "blank" t "TOC" t "EDIT" t "TOC EDIT" t "[ ]" t "[TOC ]" t "[ EDIT]" t "[TOC EDIT]" t "blank" t ­ ­. For simplicity, operations of z button will not be discribed here. Example) x/Z : Lights-out "PGM" and press the x/Z button. x/Z "PGM" : Display "PGM" and press the x/Z button. The functions of each button change with the display. Bottons and Corresponding Functions "PGM" Lights-out "PGM" Buttons displayed Nothing displayed