Subject | Text |
stereo fuses | i have a sony receiver that suddenly went dead. the power light still turns on but i get no sound, |
| [quote:0be7f001a9="Anonymous"][quote:0be7f001a9="jts1957"]What is "stucked mode?"
What i |
|
audi chorus always back in safe mode | hello, i just installed my original chorus, connected alle the wires as original and every time i tu |
Philips FL2.16 | Hello!
I need electric parts list for this chassis. Some components in power supply (smd) can't d |
Search alpine CDA-9812RB schematic | I search a shematic for the alpine CDA-9812RB.
I have a chip will explode and i don't have his en |
| hi, the samsung sounds like a vga chip fault, most likely a dry joint. i expect it is a bga chip whi |
| RF connector for tuner.
Reattach the original "stub" to the tuner being very careful ab |
| First check the vertical output IC for poor solder connections and check for leaky capacitors ( loo |
Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Hello world, I am an amateur DIY-er, and I am trying to fix a Sony TC-250A Reel-to-Reel deck! (A poo |
Potable phone help | hi,
i currently have 3 panasoic phones all the same model only 1 is the central station for signal |
Manually tuning Philips DC710/64S | I would be grateful if anyone could help me: I bought an FM transmitter for my MP3 player, but it r |
| Thanks for the fast reply.
Well, I didn't find any SMD fuses with a socket, but I found that looks |
| r5056 is 680r, r5046 is 820r and r5068 is 680r all at 3w. they burn up because when the set is place |
| :) Okay: lots of folks experience these type of problems after a move. and they do just what you did |
| 6 LED FLASHES CRT FAULTY.
6 LED FLASHES FIELD CHIP PINS.
check the soldering of the field chip at |
| First off you said that you're good with a soldering "gun". If you use a soldering "gun" rather tha |
Re: Tektronix 422 | [quote:da0218760b="ninelives"]I have a Tektronix TM 515 mainframe with the following plug-ins. Due |
|
Re: Fisher RS-9015 Receiver | [quote="jts1957"][quote:21f80fd1e1="soundfixer"]Newbie here, Looking for service manual.
|
| Wait until the "----" appears. Use buttons 1-4 to enter position 1-4 (i.e. press 1 to incr |
| THESE SETS WILL GO INTO STANDBY IF THERE IS A FRAME FAULT, START BY REPLACING THE FRAME IC WHICH MAY |
Video camera Panasonic NV-DS29EG. | I need service manual for this camera. IC "S3514A" (smd) on PbF is broken.
What function |
help | I have a Philips em2e Tv and the EW blows.It is tree smd transistor that blows ,and i cant see the |
Varying degrees of electronic knowledge | I've Noticed That Users of the site have varying degrees of electronic knowledge it would be helpful |
| If you have no experience in tv-repair, YES you should be very carefull when soldering on the inside |
| Hi,
my amplifier developed exactly the same problem. Checking out the french web site I found on |
Philips RC106 Car Radio/Cassette | I am looking for the keystrokes required to access the 20 memory locations for the radio station fre |
cdx-7800x for lens | pls give add. some ser.station for car audio cdx-7800x |
| The audio bandwidth is not a large problem.
An ordinary fixed telephone line typically has a bandwi |
Re: 50MP1 | Thanks Dooney for your help. Here are some pictures of the NEC 50MP1. I hope you can make sense of |
| [quote:40a845b458="elmir"]Hi
3189 no working:(
There are 2 eeprom: M95320 smd + 25P10 smd
W |