Subject | Text |
| No video, OSD and Audio fine.
U18101 on PIP module, 3.3 v regulator, #214704
Q26902 on Comb Fi |
| Paolo,
Chances of finding the value of the SMd zener is next to impossible. There has never been an |
|
Dell D1626HT Sony trinitron monitor.. needs fix please help | okay. im a micro-electronic engineer student in australia and i'm trying to fix my friends monitor. |
| You could have a bad tuner.
Part # 859825400 Vendor: SONY
TUNER (BTF-WA402) WAS 859825410
You |
60" Philips Rear Projection SSB Module Question | I need a new SSB Module board in my Philips 60" television. Can anyone tell me whether this in |
All Power Sources in House Pick up Radio Frequency...help | Okay so I noticed when I was hooking up my stereo that even when it is on standby, if I put my ear u |
Uniden EXP970 continuously ringing | Hi
I have 3 years old never used Uniden EXP970 cordless phone.
If I connect it to the charger, |
Re: Same Problem | I am also having the same problem, the power light goes no and off like flashing. At the past we put |
| There is no set standards on numbering on SMD transistors. While there are several databases availab |
DAEWOO DSP-4210GM SP110 chassis | hello fellow techs,
Does anyone have access to the partslist of the X-SUSTAIN board of a Plasma P |
sony dsc p93 no power on | Hello all,
I am having the same problem, the device will not power on. It stopped working suddenly |
| what square is D701 in, in the complex assembly diagram?
yes i have a soldering iron and know h |
| Hi,
Sometimes its due to bad joints in the soldering of tuner module to the main board. Try re-so |
| I have the same problem with this TV. I'm no electronics guru, but I can use a voltmeter and a sold |
jvc MX-J700 STERIO | Hi,
I have a MX-J700 sterio in the 3 CD component is not working.
I put cd on it in spin about |
Playstation 2 | Hi. I have a play station 2, and i had a code for my doughter to watch DVD 's now forgot it ,is th |
Re: philips 25gr | [quote:f15e5ef5bb="polaret"]Hello
I have a philips 25gr TV and the problem that i have is that aft |
|
Neovo E-19A repair | I successfully repaired my Neovo E-19A lcd moniter yesterday and it still works after a 24-hr burn-i |
Sony F355E video camera: capacitors gone? | I have an exceedingly old (some 14 years old, I think) F355E 8mm video camera.
After maybe two or |
Please help : My Panasonic television isn't well at all! | About 3 weeks ago, my Panasonic TV started to switch to standby mode quite regularly and, during the |
Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
Re: Another loose connection | Well, availiable is such a strange word, but I have it though. Post your e-mail here, I will mail it |
Phone PBX Executech mauals | I "bought" a manual from an ebay auction for a PBX system. Though the guy advertized it as an "origi |
| You should have tried [url=www.jimsantennas.com.au]tv tuning[/url] for your Toshiba TV.
There m |
50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
memoria | Hi from Rosary. I have a problem with a tv sinudine 20425mambo:nel dissaldares the eprom(smd) him an |
| The set is shutting down under protection control because something is not right- this is designed i |
| I do not agree with Dfarhen, if you do not know what you are doing or do not have a tester for the c |
| poor soldering on frame ic would usually cause set to shut down with error code of 13, and picture w |
sony kv 27ts35 shuts down on cold start | Hi, I have a sony kv 27ts35. It shuts down on a cold start. If I give it a love tap it stays on for |