Subject | Text |
Re: TY ITT Nokia 7171 digivision | [quote:105b4dbf12="gavrilo"]Hello,
I have a TV ITT NOKIA DIGIVISION 7171. There is no color on t |
| Try this. Bad solder connections on the input plugs. Resolder them and let me know or ask Brian. Had |
|
| Replace the electrolytic capacitors at the primary side of the power supply, all the small ones, not |
re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
SHARP | HI MARIO
IVE GOT THE SAME NAME MYSELF,FIRST OF ALL WITH OLDER SHARP TV YOU WILL HAVE |
| [quote:5438d89434="Anonymous"]Line OutPut Transformer earth would be under the Line OutPut Transform |
Sony | Bad solder joints are a common problem with Sony TVs. Look for cracked joints around any heat produc |
| Oh..., another possiblilty: Bad solder joints.
Try slapping the top and sides of the TV to see i |
| Often when the power connector breaks away form the motherboard on laptops, it is almost an impossib |
some tips for you!!! | Hi!! sir i think as you mention of your problem about the TV... as for me and as what you mention, y |
Re: Protect LED | Set is now dead again as I suspected it would be (almost made it to XMAS :x), anyone have any clues |
| Check Q4401 to see if it's shorted, resolder cold solder on t4301.
Also resolder L401near the q40 |
| Unless relay contacts are 'welded' together or relay energizes just for an instant - 'was last ON' m |
| Resolder the vertical IC. Or, remove solder and resolder. |
| yes I can. u ment by going to menu 0-3-7-0 entr right? & check fluid on DM boards where I solder |
| Check C863 (4.7 mfd@50v),also check Q404 (2SD1556) and resolder joints on horizontal driver transfor |
RCA | You don't give a model number but on several RCA/GE models during the 90's they had a problem with s |
|
kv_29v10m | i already resolder the vertical ic and replace crt socket but still no luck, pls, any other suggesti |
| If you get a diagram you can see what you are soldering:)
If not, replace the electrolytics around |
Hitachi tv | Joe, are you saying he charged you $375 to resolder the stk`s??
cause if you are you definitely got |
Dead Vestel | Hello,
Fault is probably the line output transistor. The cause of its going short is poor connectio |
Sony KVC2913D No Picutre | The above TV (Sony KVC2913D) has no picture, just horizontal lines. As if the channel is off tune. A |
| 1) Resolder all the output transistors solder joints and any other intermediate transistor stages th |
| Hi,
U sure its the SMPS module faulty? There's power to the audio section of the board... :? Alth |
Circuit dia of SONY KV-J21MN1 21" colour TV. | Please does anyone have the circuit diagram of SONY TV
Model number: [b:39e1f31a82][u:39e1f31a82]K |
Sony tv | Hi Buddy 128,
Resolder vertical output stage and check R518 , R519 (0R47)
Greetz,
Picasso |
| Repairing solder connections inside a modern tuner, on board, or discrete, is very fine work.
Tuner |
| Resolder or check for dry joints between the IR sensor upto and including the microcontroller chip. |
Re: problem with tv sony KV-C2981D - ERROR CODES | [quote:47d7ac3dc7="riki"]When tv is started for very first time in a day,there is no sound and pictu |
| Resolder the vertical ic before you toutch the tuner. If it is the tuner take it apart and toutch up |