Subject | Text |
more info again | I've read more on this type of problem. It seems an easy response is to bring it to a certified repa |
DSF68NX IDC2 Stuck in stand by | Hi Guys
I have a Ferguson DSF68NX IDC2 that is stuck in stand by. Does anyone know of any common |
|
| I have or can source manuals for most common office phone systems btw, if anyone's looking to trade. |
Brother Fax 920 | :( Does anyone repair electrical faults on these machines |
Re: Bosch IC | [quote:9b532acf1f="AlekseyRn"]Hi, Iam find datasheet on IC Bosch 30344(B140593) .This ic used in To |
Philips 28pw6515 - Painter IC faulty? | Hi, I was wondering if someone could give me some advice. My TV has started switching itself onto s |
| Squeal is caused by power supply being overloaded. Most common problem is shorted horizontal output |
Compaq P110 monitor | I have a Compaq P110 (Sony GDM-500PS) for repair on my bench, displaying wavy verticals - I have a f |
Homemade Q330 | I had the same problem of no sound with CP-101. Thanks to the list, I know that the problem was due |
jvc/tv | I HAD TWO FAULTS LIKE THAT STOP YOU HAVE DRY JOINTS ON
VERTICAL IC STOP GOOD LUCK :lol: |
| available on this site, search under a10e, 99% of faults are ic7064. |
| My idea is that you forgot to check the caps, those are mostly like the cause of most faults, ESR is |
akia tv/dvd combo wont turn on at all 6 months old | used to make faint clicking noise. I isolated the noise to a power relay on p.c.board . I purchased |
7" TFT monitors, white screen | Now I have to repair a dozen of 7" TFT monitors (like automotive rear seat entertainment or tru |
RCA picture problem -- amateur desparate for help | I am a garbage man and one day on our route, a customer had given me a 37 inch RCA. He told me it h |
| dear mark thanks for help. I have seen those 2 faults you wrote.
1. In one Tv i got sound ( |
Medion md-4631 | I need the service manual or instructions on repairing this unit for common known faults. Mine is no |
|
| just change the micro, it is responsible for 99.9% of faults on that chassis |
| Without some sort of a schematic it is hard to tell. I'd say chances of the transformer being the pr |
| Yes, have test equipment.
It's old relatives TV. Just wondered if there is a common fault with t |
| Take it to an authorized Thomson Service Center and they will know exactly how to correct your probl |
PHILIPS TELEVISIONS LED AND MODEL NUMBERS | HI ALL
THIS IS INPORTANT WHEN POSTING FAULTS FOR PHILIPS TELEVISIONS,ALWAY POST THE MODE |
TV Bush WS6671SIL | Might be worth checking the eprom settings by entering the service mode to see if they are correct a |
| as usual fault will be the painter ic, this ic is responsible for 99.9% of faults on this chassis |
winrar | Hallo!
You have to use Winrar, otherwise try opening file with Winzip.
Winrar is a common progra |
Philips #27PT6441/37 will not Turn on! | Philips #27PT6441/37 Will Not Turn On!: I've been reading up on the internet and it seems this is a |
goodmans w322ns | your television is fitted with the formenti f19 chassis very common used in proline/goodmans televis |
Zenith - convergence problem | I have a zenith projection tv model icq50hb94w. The other day i removed the video input cables at th |
Sony vlp-cs3 dead | My sony vlp-cs3 is dead, nothing happens when power button is pressed.
Fuse is ok. No voltage is fo |
| Hi,
Sounds like a high voltage short to me.
Usually the HOT (horizontal output transistor) is |