| Subject | Text |
| NEED S.M FOR Di 470 MINOLTA | HI,
I NEED THE SERVICE MANUAL FOR MINOLTA Di 470 COPIER,
NEED HELP , |
| Re: I have GX 470 | [quote="Umberto"]I have GX 470 service manual. can it be useful to you?. Y
ou which manua |
|
|
| Harman Kardon TD 470 (Stereo Cassette Deck) | Hello everybody
I need to "Harman Kardon TD 470" (Stereo Cassette Deck) Service Manual. |
| printer controller Rw 470 | I need RW 470w printer controller use for Aficio 470w |
| Answering my own question, I replaced C424=100 uf,35v along with C425=470 uf,35v C427=2200 uf,35v an |
| He works!!! | So, the diagram circuit showed the R310 with 470 Ohm, and the 12 V is become 6V, I've put a 47 ohm a |
| Tv Schneider TV29M361 picture problem | Hi everyone!
I have a problem with my TV set Schneider TV29M361.
The TV have had no image but had |
| TV Chassis Philips FL4.26 Flybacktrafo/Blurred image. | After replacement of the Hor. Flybacktrafo by a non-original
type (HR Diemen), the set had sync pro |
| will do, sidsparks, although model is actually cp101 and not cmt101 as originallythought. However, C |
| Switching power supply repair advice needed | I have an SPS from a very late model LCD TV (Viore) which looks fairly simple in design and is yet g |
| Re: Philips 60PP9202 TV chirping noise when powered up | [quote:c9acb189d7="reynolds1971"]Got it fixed. Just wanted to say thanks for the help, I couldn't h |
| just a update minnie.
i replaced the shorted 470 surface mount resistors on the lower buffer boar |
| Philips Magnavox 9P6444 64" RPTV | A friend has this tv and the 470 UF/200V capacitor has blown (tip is blown up). Does anyone have th |
| Re: Samsung Syncmaster 711MP LCD TV Monitor -Not Powering Up | [quote:e8914f791a="Anonymous"]I had Same problem. - Now Repaired -
Three of the Five Electrolyt |
| Common failure parts are IC1421=LA7832=JVC # LA7832= sub with LA7833, R1541=1.8 ohm,2W (metal fuseab |
| about polarode | it looks like a flad panal t.vs power supply,.well first of all you need to check or replace all cap |
| 42" digistar plasma screen | I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
to be completely visible (ho |
|
|
| hi minnie
on further investigation i have just noticed theres 470 surface mount resistors on the |
| cpt101 | Q 330 is the muting transistor (KRC103) which goes faulty also change the jumper wire JW307 to a 47 |
| Service manual | I have electrical diagrams for Toyota land cruiser 2000 would you exchange for the GX 470 workshop m |
| Suite | Hi
I've changed the Fr308 by a 2.2 Kohm reistor, and now He don't load the tape, and the pause ligh |
| Re: 42" digistar plasma screen | [quote:0786074833="rushman"]I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
|
| [quote:eacd3436c9="Anonymous"]hi,i don't know if this information is of any use as i am new to forum |
| im not sure if they were blew when origanal blown board was in the set as i never checked them till |
| R832 1-216-817-11 METAL CHIP 470 5% 1/10W |