| Subject | Text |
| Hitachi 50UX58B | Found quite a few parts are still available from original manufacturer. There are quite a few parts |
| Visual (magnifying eye) and Scent inspection passed.
Can not see any suspicious capacitors, resi |
|
|
| Thomson Clock Radio RR60Q transformer parametres | I need help. Thompson Clock Radio model RR60Q. I need parameters of transformer. May be some have th |
| KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
| HP Laserjet 4P paper path assembly | Hi,
Some how the rear paper path assembly (with the wheel for rear or upper paper path) fell out |
| Unless you have some experience with mixing boards, that is not something to tackle. You'd at least |
| Need Cap Values: Mitsubishi CS-35301 36" TV | I have a Mitsubishi 36" TV with the infamous bad capacitor problem, and two capacitors on the main p |
| PTS?
thing is, having seen quite a few of these.... why is the main board suspect?
replacing a b |
| FSB228-3F01 | I also have the bad capacitor problem; my tv will not even turn on. I found C33 was most impressive |
| Sony 41" TV circa 1997 | Hi: Any thoughts about a screen that suddenly started to shadow in purples and greens, double imagi |
| Memory full Toshiba e-Studio 16 | Hi. I need help with Toshiba e-Studio 16 copiers. When I put 20-30 double sided sheets into the RADF |
| This is an old subject I know but I’m still using my 446Pro for gaming. It’s 14.5 year old monitor b |
| Samsung Plasma - no picture. Mod: PS50Q97HDX PDP: S50HW-YB02 | Hello.
I have a Samsung PS50Q97HD 50 inch plasma TV that keeps blowing new boards and I don't know |
| Sears 509-14370 TV, chassisA67 | Sears 509-14370 TV, chassisA67, made by JVC, the board is labeled CKF0822-DU3-1. TV turns on when f |
| Re: sony trinitron, falt screen 32inch,where does this cable | [quote:7a6016dabd="CheM"]I got a TV for free, it is brand new, but the screen does not work. I opene |
| Toshibas and the like | Hi there Larry and Tibor,
last night I repaired my Toshiba. Larry, you are completely right, the |
| Sony projection TV screen is jumping | I have an older Sony projection TV and after about an hour of watching the picture starts to become |
|
|
| magnovox 55p8288 | I have a 55" magnovox projection tv with initially was some color shadows to one side. All col |
| Rolling Screen on Mitsubishi Rear Projection TV – Model VS-5 | Rolling Screen on Mitsubishi Rear Projection TV – Model VS-5071
Mitsubishi Rear Projection TV
Mo |
| Well, I was going to launch into a description of how to test the old power supply, but that won't h |
| Well I finally was able to do the repair on this set. I ordered the wrong caps at first. I ordered t |
| Service Manual for PC monitor Fujitsu FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have thi |
| samsung sv-dvd1ea don't open | this is combo dvd/vhs video.don't open the dvd's door.double sensor is o.k.when push the button open |
| Calibration of PM6303 LCR Meter (non-A) ... | Bump no longer needed! Many thanks to Fluke Europe Netherlands BV, they sent me this section of manu |
| 110 and 220 volts 50 and 60 Hz | I think that what you mean is that some adaptors cover all standard voltages between 90 and 270 Volt |
| PA System "BUZZ" | I have a P.A, system @ my shop that I can not get the constant "BUZZ" to STOP.I've tried speakers-a |
| [url]http://elektrotanya.com/?q=showresult&megnev=&megnev2=strde875&kategoria=&kat2= |
| what square is D701 in, in the complex assembly diagram?
yes i have a soldering iron and know h |
| It sounds like a crook solder joint in the verticle section of the circuit board. Not too hard to fi |
| Schematic diagram for Proview 772M (200-100 769N RevB ) | Does anyone know where I can find information about my 17" Video Monitor (Proview 772M) I have some |
