| Subject | Text |
| Looking from the top of the board, both R105, R106 are next to a CN2 connector. As it was said, use |
| [img:bf11ed5aed]http://i67.photobucket.com/albums/h287/rramani/ss12ps.jpg[/img:bf11ed5aed][/URL]
|
|
|
| [quote:dfd6168a61="minnie"]R7731/7736/7725/7716/7721/7711 1.8 ohm 1 watt.[/quote:dfd6168a61]
Hey |
| Cambridge csw250 Soundworks trouble | Someone can help me???
My pc subwoofer, a Soundworks digital by Cambridge, model CSW250 passed out |
| Common replacement failure parts are Q4101=SGSIF461=RCA # 200165, U4101V=TEA2261=RCA # 200419, F4005 |
| Replace IK04 and IK05 with STK392-180's, check RK46 1.8 1 watt, RK42 2.7 1 watt, RK62 2.2 1 watt, RK |
| ok here's the update. had a repair person and his son come out (from a local small tv repair shop i |
| Problem is the wattage of the soldering iron. 25 watts is simply not hot enough . On double-sided p |
| rk50 resistor | the resistor keeps blowing right away. i even replaced it with a 2 watt 2.2 ohm and still blew it! |
| Sub 392-110's with 392-180's. Check R7726, R7736, R7731, R7716, R7721, and R7711. All 1.8 ohm 1 watt |
| change boot elkos..i think that is 1 or 2,2 mf 450 volts and 47mf 26volts..
regards |
| F/SELL BRAND NEW Panasonic 42" Wide Screen Plasma TV $6 | EGOLD ELECTRONICS PLC / BEST ELECTRONICS
COMPANY.
|
| Re: potentiometer / rheostat questions | [quote:78dcb08f64="jerry b"]Hello,
I have some 12 volt DC "rope lights" I am putting in |
| DRA 685 "Protection" Error | R105 and R106 are underrated resistors. In my receiver, both of them failed.
Replace them both w |
| Convergence IC's in this case are dual amplifiers. On IC does red and half of green. The other IC do |
| For sale Pioneer DJM-600 mixer for $500 | [b:cadfdd16a6]WE ARE WHOLESALE DEALER OF ELECTRONIC WHO SPECIALIZES IN THE SALES OF PIONEER DJ MIXER |
| PVY4665RK | :roll: Larry, I hate to keep imposing on you, but I have been unable to locate any supplier that sto |
|
|
| [quote:c0b741a804="shawng"]I really don't know to much about recievers but I've allways fixed my own |
| kenwood amp no power | model kac-8152d kenwood 1100 watt amp for a car...
does not power up...any help appreciated...thanx |
| 4.7 ohm 1/4 watt. |
| Try these two steps
1. take bottom access panel off and check for blown traces on main pcb.(near fr |
| Guitar amp problem | Hi folks, don't know if anyone can help me but my problem is this:
I've got a Sessionette 75 guit |
| LOL.
Funny you should mention, I was hunting for my meter for 2 hours today, blaming the kids etc |
| amp | i got an Holmes tech 450 power mixer,pa the unit has an hum noise,plus i,m looking for the schemati |
| The wife said the picture went a little fuzzy before they shut it off and when my son try to use it |
| There may be no 5V to the microprocessor. Check R3509 and D6501. Replace R3509 with a 47k 1 Watt ver |
| Hi mrtweaver, I did a Vizio supply two months ago that had a shorted schottky diode . Multiple damag |
| Hi,
I also have the Mackie SRM 450 and am trying to replace the R282 and R283 10 Ohm resistors. I' |
| Well, any high voltage capacitors could give a nasty shock if fully charged, they can be discharged |
| 392-010's sub to 392-020's, 392-020's sub to 392-040's. It's all a watt game. STK392-040's are a hig |