| Subject | Text |
| Re: philips 25gr | [quote:f15e5ef5bb="polaret"]Hello
I have a philips 25gr TV and the problem that i have is that aft |
| Neovo E-19A repair | I successfully repaired my Neovo E-19A lcd moniter yesterday and it still works after a 24-hr burn-i |
|
|
| Sony F355E video camera: capacitors gone? | I have an exceedingly old (some 14 years old, I think) F355E 8mm video camera.
After maybe two or |
| A very direct answer to your query is that the specifications printed on the power supply by the man |
| Epson EMP-7600 Projector | A projector I bought used for my son seems to work fine for about 40 minutes then the "lamp ind |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| memoria | Hi from Rosary. I have a problem with a tv sinudine 20425mambo:nel dissaldares the eprom(smd) him an |
| The set is shutting down under protection control because something is not right- this is designed i |
| It sounds like some filter capacitors have dried out and need replacing. The blown fuse means there |
| The Horizontal transformer does many things. If you have the schematic, you could remove all of the |
| Re: BlueSky (LG) i think PDP 42V5 | [quote:3939adc83d="bitje"]The problem of this screen is no picture and sound at all, power led on th |
| As a newb with electronics, it may not be easy but certainly possible--we all have to start somewher |
| Which style of casing (SOT-23, TO-92, TO-220 etc) do those components have? Are they SMD or hole mou |
| Dell LCD E193FPp | I have this unit with some charred smd resistors in primary of smps around pwm controller circuitry; |
| Monitor doesn't work... | Hi guys...
my monitor acer p193w does light up but turns off after about 2 or 3 seconds. while ther |
| few things i forgot to add.......
sometimes i have to hold the mains power button down to make it |
| MOV | Looks like a Metal Oxide Varistor or MOV device to me too.
These are usually near the powersupply |
|
|
| guitar processor zoom 4040 | please schematic for zoom 4040 (guitar processor)...
or what´s t529c (smd regulator)?????
|
| the set is fitted with the philips a10 chassis, over 99% of faults on this set are caused by failure |
| If you do have any document (including Credit card Rct.) that shows the date of purchase, it is a va |
| nid schematics for monitors | nid schematics for my pending monitors HP model d2825, IBM model 6547-01s, ACER model 7033A, Winpro |
| Measure the B+, if it is fluctuating the high voltage will also be fluctuating. When the voltage goe |
| As far as SMD diodes, it is next to impossible to determine the exact part numbers without the docum |
| Philips fl 2.16aa chassis | Hello i have the above TV and after black out i have damage to std by (start)i download a manual of |
| Sony SSC-DC50AP service tips | Hi folks, i have succesfully brought back to life several SSC-DC50AP CCTV cameras and thought i shou |
| Re: not that fault | [quote:cc441fa2a7="Anonymous"]hi i tried that but not fixed it, sometimes if i keep turning tv on an |
| It sounds like it could be the powersupply. Are you good at soldering and what test equipment do you |
| Aiwa C201 | I have an aiwa c201 Tv.When i poeron the TV it is giving high oscillation sound.Checked the H-Out an |
| [quote:40fb5bf945="dkollander"]I have been doing some research on the 32av500u and here is what I fo |
| [quote:6cc2255013="Anonymous"]anyhow, that is great! much appreciated. I could not find that manual |