Subject | Text |
| Being a switchmode powersupply I would not run it without a load otherwise it may self destruct. Plu |
| I don't know your amp or country. If they are your main powersupply diodes, I would be checking the |
|
JVC Plasma GD-V4210 Pre-Regulator | I have a JVC Plasma Display which has a defective Powersupply. It blows the 10 Amps fuse because the |
Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| K, as far as SVHS goes, while it is a rather complex path & can be caused by variety of capaci |
| If the powersupply is not normal it generates a reset signal to the processor.
Go into controlpane |
| Is it a linear or a switching powersupply? Is it an internal or external supply?
If you can't find |
Philips Streamium Satellite WAS7005 service manual | Hi,
Could anyone please indicate if they could share the service manual for this Satellite Audio |
| Also check the TDA6108 IC and the 3 BAV21-diodes (SMD) on the CRT-board.
If the fault isn't solved |
| Set shuts down intermittently and has to be unplug and replug for it to restart
replace C832 USE 3 |
| [quote:627ac39644="FalconFour"]Thanks!! :D
I already replaced the two resistors RP30 & RP31; |