Subject | Text |
sa-940 schematics | Help me! I need a schematic amplifier for model pioneer sa-940. Thank you very much. |
42pd9932 plasma TV Philips | I am looking for the service manual for a Philips plasma tv, model 42PD9932.
Thanks,
JB |
|
raido swithing on and off | I have a 1999 VW Passat with a standerd radio casette and cd changer in the boot, the problem is tha |
Did i blow my 220Volt recharger?? | Does any one know if i plug my 220 volt rated charger into a 110 voltage outlet if i will damage the |
| Still plugging away...
Re-read earlier posts and saw the fuse is supposed to be 500ma not 400, so |
yamaha em100 | does anyone have or know where I can buy the Power Switch for a Yamaha EM100. It was made in 1976 |
Grundig R100 on VW CADDY 2003 | Please tell how can I connect an auxiliary device(mp3 player, mobile cd player) on CD auxiliary chan |
RCAprojection | Only problem is RCA parts have ceased to exist.I cant buy the board,Could anybody tell me the IC ,mo |
SHARP model 27F-S50 cable problem | tv turns on, video works, but on regular channels all i get is static, even with the cable plugged i |
Avionics Maintenance/Repair | Fomer USAF communication tech., having experience on MAC & TAC aircraft on flight line, shop, wh |
Philips 28ST2781/05B help | I've got a philips 28ST2781/05B thats died on me and want to know if its truely dead be for it gets |
| Those cable filters were used in some early cable tv networks for descrambling pay tv channels.
The |
| There's no bulging caps that I can see on any of the boards, including the power supply.
So, I sh |
| I have never seen or heard such upgrade myself before.
If the equipment was originally built in |
Re: Opel radio code | [quote:c01915bcf5="pezii"]Hello.I need the code for SIEMENS VDO CDR 500 (E) 2 F4
N 93171870
GM 050 |
| Have you checked your wall socket, and powerboard?
Have you checked the fuse and the Horizontal Out |
Mitsu WD-62825 | Hi guys,
quick question? after replacing a new bulb on wd62825 tv won't turn on anymore. blinking |
|
Matsui DVDR100 | Hi,
I've got the above DVD recorder and have had it about 18mths. It doesn't get much use either |
| The main reason in gluing the bigger caps is to prevent movement while the PC board travels through |
| I have the same problem, but there is no burnet components, i tested the regulator there is somethin |
| That's enough to prove that the AMP board is definitely defective. 12 volt power rail has a low resi |
| RE: Half loader arm - I believe I see which one you're talking about, and yes it is quite free. Ths |
AIT on an Audi 100(1992 mod) HELP! | I am looking for the location of the AIT sensor in the engine room of an Audi 100 sedan.
PLZ Help! |
| it is a fact that air cinditioning removed water from the air. where does the condensetion come from |
Re: code for alfa 147 GTA | [quote:b4585e9eb9="titounight"]HI
i need code radio car of my alfa 147 GTA model 2004
serail num |
Panasonic audio board part #. | Got a Panasonic mdl;PV-M2776 w/no sound. Need part number for sound PC board.And any tips you may ha |
tv | [quote="drum"]sorry for the lack of info its a Sony TV is ther any war to make a recall or deguise ( |
what part did i blow up?? | Hi there. a few years ago i purchased a portable screen w/ built in
speakers for my brother's sony |
FR 872 failure | I downlowed my lap top controlers incluided the bios update from VAIO's page then it is out off serv |
vertical IC in your television | The vertical IC is never mounted on the crt board.
In modern TV's, it could be a TO220 device (TDA9 |