| Subject | Text |
| I assume the 2 rings your talking about are at the base of each crt?
as in, above where the circuit |
| turning it off and back on clears this up?
sounds like it may be a DCU problem (digital convergence |
|
|
| Mark you're on the right track. Try replacing your convergence ic’s. Don't forget to check the bias |
| zenith projection pv5236mk | after replacing flyback,drive transistor ,diode,2sk1532,fuse,i now have picture but no convergence.a |
| I asked whether the CUSTOMER convergence (Not Service convergence) was adjusting properly. If the ve |
| Sony Boards Wanted | You wouldn't happen to have any older Sony Projection Sets in your bone pile...i need 2 different Co |
| NEC multisync mt-1000 LCD Projector | im looking for any type of service manuals, or info for repair and adjustment
i am mostly concerne |
| I have a Sony KP 48v75 that flashes the standby light continuosly when plugged in AND when I pwr it |
| sony kp-53s25 | I'm working on a KP53S15 right now. It does the exact same thing. But the thing is if I disconnect |
| am I getting hosed on repair costs? (Hitachi 50UX58B) | Okay - my 50" Hitachi Ultravision - 50UX58B (1998) set went bad days before my Super Bowl party. I r |
| replace the convergence ics. |
| zenith projo | check r3243 by the horiz output 110k resistor will cause bad video poor convergence and no menu |
| rainbow? probably convergence.
are there 3 distinct pictures visible, once for each color? its a co |
| Samsung HCP4752x 47 inch Rear Projection | Hello I am Trying to find out if I can Fix a convergence problem on my TV by first going through a s |
| Samsung PCL5415R--service manual | Have a convergence problem and need manual to find problem and replace parts. Thanks! |
| Belinea 108080 | I need circuit diaram or service manual for Belinea 108080.
It has convergence error, although |
| It has convergence issues, the focus is off on all three guns and will not focus. There was a few ho |
|
|
| Hi. We are an Hitachi service center here in Texas. If one or more of your green lights dont stay |
| I have seen the caps go leaky, basically turn into a resistor. it wont read shorted but when voltage |
| Invest in a service manual. You’re probably going to have to get the over lay and readjust the green |
| maybe i am getting hosed? | Hi Larry -
They would charge me $369.50 for labor, and $80,00 for parts.
It was an in-home visit |
| sounds like convergence.
might have a bad amp there. replace them both. |
| actually im thinking of a different set altogether. sorry..
this is a much newer set than those tha |
| Zenith | JD, first of all, what is your name? you have to pull the resistor to check it,
the video can fail |