Subject | Text |
min q m s 1300 | can konica minolta toner and drum cartredge qms 1300 used in epson printer epl 6200. |
TX36PL30 Euro 7. Line Transistor Runs Hot & Fails Aft 30 | I have one of the above sets for repair and at the moment I can't get it out of the customers house |
|
What to do with a digital clock | it gains 1 min/hour .
It has IC PCF1175CT and quartz, but no correction trimmer.
I have heard that |
STA353 | ok here or read the pdf icmaster.com
have fun
STA353
PNP Silicon Transistor
Descript |
Re: What to do with a digital clock | [quote:5fcaaddd6b="Anonymous"][quote:5fcaaddd6b="stoyan"]it gains 1 min/hour .
It has IC PCF1175CT |
| To answer your question, No you can not use two instead of a single dual gate. Purpose of a dual ga |
RCA PKT 195 | Im working on a RCA PKT 195 projection tv that has a CTC195 chassis.The promlem was a bad flyback af |
mitsubishi vs-45501a | I just aquired this tv for free. Worked fine when I first hooked it up for an hour or two. I left th |
Nope not the IC | :( :cry: changed it but it's not the IC.
I cant check the caps at the min.
Any other ideas. |
Panasonic euro-7 without sound | :D I´m new here...and i dont speak english very well...sorry!
I have a panasonic without sou |
| [quote:e4d10228ee="gary"]select chanel 91, set sharpness to min, exit menus, quickly press RED GREEN |
Re: Phillips chassis PTV915 please help | [quote="Anonymous"][quote:a335d45e5b="austin970"]no raster or sound when set is turned on |
Harman Kardon Power Amp transitor progblem | Hi,
It seems this expensive H/K AVR 430 and 630 model has a design problem. My receiver also star |
DVD repair parts. | I need a source for TOP224Y, pulse width modulator and the P6KE200 suppressor/regulator diode. Thes |
NEC 61MP1 Half Screen Issues | I am looking for the location of the caps that need to be replaced, I have searched the forum and ca |
Thomson 32wt45es | I have some problem the tx after 10-15 min turn off, I think a defect of constrution. Have you resol |
| My convergence ICs went out, which they seem to do at around 2 to 4 years on this Samsung module. Th |
|
will not turn on | i have a Samson 42hd43a TV and i had my convergence board go out replaced it with part # bp95-00142e |
JVC AV-27D304 | TO ENTER THE SERVICE MENU
Press the [SLEEP TIMER] key and set the SLEEP TIMER
for "0 MIN".
Then p |
tv LCD AKAI | HI everyone !
I have a big problem with tv LCD AKAI model LM-H23CJSA ,processor
SAA 524 |
thomson ICC19 100hz | 2 min after turning on tv the picture dissapear but still have signal on the screen than goes dark, |
| Hello,
I would like to say that compaq nx 7400 with a power up password issue I have taken out th |
Re: Thanks for the help | do you mind sharing how? I am having the same issue with my n4060w. it doesnt power on till i hold d |
rolling rolling rolling | it rolls from top to bottom, some channels it doesnt at all, some it is continuous , some channels e |
Sanyo 25' CRT TV Picture Keeps going out ,Worth fixing? | ok i have an older Sanyo 25' CRT TV it is proboly 1995 what happens is
the Picture will go out then |
TV Problem | :D
I have a 32" Sony projection TV. Latley when I turn it on I am getting sound but no picture. |
HITACHI 50EX11BV PROBLEM | My hitachi 50ex11bv TV has no power will not come on. It started out it would come on then cut off a |
TV turns greenish and blinks on/off | I have same TV as above, it started to loose color vividness (fading to greenish colors when cold) a |
| If memory serves, max. voltage for most three-terminal regulators is 35 volts (7805 min. voltage = 7 |
phillips BIG SCREEN model 60p8341 PTV915 | I HAVE A PHILLIPS BIG SCREEN THAT SHUTS OFF ON ITS OWN AFTER ABOUT 15 MIN AND YOU HAVE TO UNPLUG IT |