| Subject | Text |
| general electric tv schematics | does anyone have schematics for a 1997 GE Model 27GT619 with chassis number CTC185AB ? |
| Hello, you must change the chassis assy.
The code number is A7018245B.
After make the adjustment.
|
|
|
| help on repairing board 42V5 | Need for the amplification part on this subboard for Firstline Plasma TV with PN: EPT-4200BP
:cry |
| Bad PDP. |
| When I turn the tv on the 2 power on relays come on then a few seconds later the they turn off ( po |
| ASC20130528001 | I was wondering where you obtained a copy of the firmware noted in this service bulletin (ASC2013052 |
| monitor switching on and off repeatedly | Hello!
I have a monitor Daewoo 431X that is constantly swithching on and off. During the time tha |
| Re: I need a service manual or a schematic for a TV Precisio | [quote:45d11ed897="lonewolfmk1"]...Is for the TV Precision PTV1345RMS
is the chassis "C-700 A/B"?
|
| Problem to unload information. | :cry: I am presenting problems for the service manual unloading of the chassis L9.1 de Philips. Af |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| In fact, I've bought this unit as faulty because I already bought one a few times ago and I've repai |
| Need Help - How to test boards in a plasma TV? | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points |
| Sony KE-42TS2U | No LED. Plug in plasma and it turns on for 10 sec. then shuts off. |
| [quote:47f8d28098="Anonymous"]Although this is a simple repair and requires replacing the two conver |
| schema samsung | Hi,Master.
thanks again about your info .but i can read that file , cause djvu file.how i can read |
| 50MP1 blank screen with backlight, green light stays on | Hi Plasma TV experts,
I have a 50MP1 that powers on, there is one bright color line show up on t |
| z-sus | Hi,
The IC itself has no printed anything.On the cooler are some numbers like
4921qp1002b,second l |
|
|
| Check the resistor on the flat cable from PCB to PDP module. When is resistor broken try change it. |
| Need Schema or Service Manual Samsung K15D CTV14V10 | Hi. I need the Schema or Service Manual for the
TV Samsung Chassis K15D Model CT14V10MJFXXAX
with |
| Need Schematic Diagram monitor Philips 107s | Philips ID 17C2321N/00Z made in Hungary
chassis: 9300.2 WK:9803 ????????????????
procesor K8V3191 |
| I need Schematic for TV-Philips FSQ Vision TXT | I need Schematic for TV-Philips FSQ Vision TXT
Model 15CE1510/08B
PM048848 035762
Cha |
| Depending on the brand, they'll tell you the digital main, logic, and driver/e buffer boards. When y |
| Need help with testing TV components | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points to |
| Welcome to plasma's. Seems with x/y disconnected VS and Va are ok indicating a good power supply. Ho |
| Cheers Jamie...any help will appreciated. Daewoo are not the easiest people to deal with. |
| Sony KV-2187 is a chassis G-3EN
Check this file:
//www.eserviceinfo.com/downloadsm/8363/Son |
| Service manual for Sony KV27V36 | Hi, I need a service manual for a sony KV27V36 TV. I had the tv apart and cannot seem to locate the |
| [quote:30a24d7c00="Anonymous"]Hi,
These are out of warranty repairs, the PDP,s are fine as I have t |
| Phillips 42pf9966/37 | When I push power button on side of TV I hear a click as it tries to turn on. It had a bad fuse for |
| All i found is it is CHASSIS DIGI BE2110
This is the closest one i have - might help:
http://www |
