| Subject | Text |
| plese the chassis.
I have this
BEKO.bin = TV 14" BEKO BEKOTEKNIK
PROCESSOR SDA20581-A504
|
| Please, service manual for monitor compaq model V57O | Hello I try to find a SERVICE MANUAL for the monitor compaq model V570 chassis V570(M)1.4 anybody ca |
|
|
| 42WS90E | Hello,
The Thomson Plasma 42WS90E is actually an NEC rebadged, and yes this is 100% correct the p |
| [quote:458f746099="gary"]probably a faulty pdp, have a very close look at the screen, check for any |
| what type of pdp is fitted in the unit, for some lg plasmas there is a repair kit consisting of both |
| Big screen tv's,in general. | I thought i hit a GOLD MINE one day-I looked outside in the a.m.,thought i was hallucinating...but n |
| Same TV, same problem | My Magnavox has the exact same problems. Unplugging it for the night and holding in the power button |
| switching to av1 | if it is sa10 chassis it will be the painter chip very expensive :cry: |
| Re: GoodmansGTV 69W | [quote:98ccbc9cc5="pauldk"]Thanks for replying atom, yeah apparently goodmans "supply" a range of TV |
| Read this 5 plus time, sounds like a bad panel/pdp. |
| Before that,
SYMPTOM: Distorted or no picture
SOLUTION: In order to determine whether picture prob |
| HI KEN
I MAY HAVE A SERVICE MANUAL FOR THIS PLASMA BUT IM AWAY WORKING AT THE MOMENT,HOPE |
| [quote:f50150c55a="jamie"]I have got the contact detail for the daewoo service centre which is a uni |
| Grundig ST63-660 is a chassis CUC5360.
Check this file:
//www.eserviceinfo.com/downloadsm/6 |
| Sanyo Service Manual/Schematics for CE28WP4 | Can anyone tell me where I can get hold of service manual/schematics for Sanyo model No. CE28WP4-B, |
| Hi,
These are out of warranty repairs, the PDP,s are fine as I have tested them with working cards, |
| Can someone tell me, does a pdp hiss slightly?
I did notice that as the screen powers up there i |
|
|
| LG 42v6 Plasma Lower Y PCB Question | Hi,
Working on a Hitachi Plasma with the LG 42v6 PDP.
The display has a vertical data copy problem |
| jvc GD-v4210pzw Plasma with no power | I have a jvc GD-v4210pzw Plasma with no power. it has a short somewhere on the power board (pcps0396 |
| I need a service manual or a schematic for a TV Precision... | ...Is for the TV Precision PTV1345RMS
is the chassis "C-700 A/B"?
I am needing the schemarics, ple |
| Philips Tv 14PT2666 is a chassis L01.2E.
This file is for you:
//www.eserviceinfo.com/downl |
| the resistors and diode are failing due to the panel drive ics being sc, as these are part of the ri |
| unfortuanetly that ribbon is an integral part of the plasma panel and is not replaceable on its own. |
| Ok, here is an update
Spoke to Tiny £1 per min told me to do a factory reset on the plasma,
|
| ayuda | hola si alguien me puede ayudar con el manual de servicio de dvd daewoo 5800
att eduardo
guayaqu |
| toshiba cx2897c protect code | Hi everybody . I have a TV toshiba cx 2897 c , chassis 8740 A, I had repaired search module , and n |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| IS IT PLASMA,PROJECTION,LCD ?LET ME KNOW I CAN PROBLABLY GET IT FOR U |
| service manual px42vp4g | je cherche le shemas d un plasma nec px42vp4g sur tout l alimentation |
| what square is D701 in, in the complex assembly diagram?
yes i have a soldering iron and know h |
