Subject | Text |
| There are many IC like this, made by Philips, which are controlled by a 2-wire I2C bus, i think they |
Thanks | [b:deebbcfd16]Hello,[/b:deebbcfd16]
I found your site very very helpful.I am from India,where somet |
|
Mitsubishi projection TV- picture squeezed | WS-55819 HD 1080 Medallion series |
| [quote:cb2dffffa5="sarsface"]I have an n3250w with a blown chip on my Darfon 4h.B0280.001/CS2. I acc |
| Hi did you ever have any luck fixing it? You may want to check the surface mount fuses on the main |
Re: problem with tv sony KV-C2981D - ERROR CODES | [quote:47d7ac3dc7="riki"]When tv is started for very first time in a day,there is no sound and pictu |
Sony TV just quit | 27" Sony Trinitron TV just quit. It will not turn on by the remote or on set button. Have confirmed |
PWR0502204001 | Hi
This is very frustrating as the power supply is relatively straight forward in its design so not |
| It sounds like a crook solder joint in the verticle section of the circuit board. Not too hard to fi |
JVC AV-3551S Any info on this model | Does anyone have any info on this model. Can't find anything online. ESI didn't have anything either |
Learning the curve... | [b:b3a96c42d5]I am an old tech, trying to catch-up with the new technologies
out there........
|
logitech keyboard | I need a schematic for Logitech keyboard , please . |
SONY PC<->Display ( EEPROM programming ) interface | Sirs,
If want to access eeprom data contained in the SONY GDM-F series displays you need this. A |
Centrifuge Heraeus Labofuge 200 | Hi, I need an electronic circuit schematic for the Heraeus Labofuge 200 centrifuge. Can send me to m |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| TDA836xx (circa 1994) series TV processors were designed and aimed for analog television---way befor |
Re: power supply board p/n | DARFON
4H.B0280.001 /C2
Caution: for security mains isolation transformer is used.
For the 2 |
|
service manual pioneer sx 950 | i need a service manual for my pioneer sx 950. its has a power problem please help. |
| Antique Electronics Supply in Tempe AZ US. I believe buys tubes, depending on what they want and mus |
Bright | There is a black transformerwith a red wire coming out of the top and attached to the back of the CR |
| Squeal is caused by power supply being overloaded. Most common problem is shorted horizontal output |
STR-DE598 no display from using wrong speaker (dead) | hi , new to the forum but hope som1 can help , got this str-de598 from a friend who clams to have pl |
| PTS?
thing is, having seen quite a few of these.... why is the main board suspect?
replacing a b |
IR to USB or infrared to COM1 | I need schematic of an infrared sensor that connects to USB or COM1 |
Heat Transfer Compound | It seem there are many different heatsink compounds on the market, silicon, zinc, hardsetting etc. N |
Panasonic NVH75 VCR service manual | please, I need the schematic of Panasonic NVH75 VCR.
You can help me and upload the service manual |
Playing around with power transformer output voltage | I have a transformer from a junked UPS. There are two primarys and a heavy duty secondary. If I fee |
| Is the HP Laserjet 1320 similar to the 1150/1300 series? That manual could be of use to you. |
| The only way to determine what the problem is would be by examining the supply on the bench - remote |
Re: Service manual for KX-FP80 | I have what You look for Digital board for kx-fp80 .Can you send me your e-mail |