Text preview for : Panasonic_PT-LW80NTU_PT-LW80NTE_PT-LW80NTEA_service_info.pdf part of panasonic Panasonic PT-LW80NTU PT-LW80NTE PT-LW80NTEA service info panasonic Beamer PT-LW80NTU Panasonic_PT-LW80NTU_PT-LW80NTE_PT-LW80NTEA_service_info.pdf
Back to : Panasonic_PT-LW80NTU_PT-L | Home
Warning Order No. TSD0808S007
This service information is designed for experienced repair technicians only and is not designed for use by the
general public. It does not contain warnings or cautions to advice non-technical individuals of potential dangers in
attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced
professional technicians. Any attempt to service or repair the product or products dealt with in this service manual by
anyone else could result in serious injury or death.
Service Manual PT-LW80NTU
PT-LW80NTE
PT-LW80NTEA
Subject : List of serial terminals (RS-232C) control commands.
Please use this service information together with the Service Manual as follows :
Model No. Order No. Modification applied from
PT-LW80NTU/NTE/NTEA VED0805387A0 -
Some of commands have been changed and added from PT-LB80NT/LB75NT series as below.
Control commands of changed and additions for PT-LW80NT series.
1. Change of aspect parameter (VS1, QS1)
*Correspond to parameters of H-FIT and etc for the wide model(LW series)
2. Added commands for screen format (VSF, QSF)
*Added functions for wide models.
List of changed/added commands.
*Please refer to the parts in the attached materials indicated by red font.