Text preview for : vqt9002.pdf part of panasonic vqt9002 panasonic Video NV-SJ216 vqt9002.pdf
Back to : vqt9002.pdf | Home
Video Cassette Recorder
Operating Instructions
NV-FJ614 Series (Hi-Fi) Contents Page
NV-FJ613 Series (Hi-Fi) Warning and Important Information
2
NV-SJ216 Series (Mono) Safety Information
Connecting and Setting up
3
Controls and Components
Playback 4
TV Operation
VCR Operation 5
Menu Operation
Recording
Timer Recording 6
Other VCR Functions
VCR Settings 8
Satellite- or Digital Receiver 10
Functions of the
NV-FJ613 EC/ECM/ECN/ECY Series (Hi-Fi) 11
Functions of the NV-FJ614 Series (Hi-Fi) 12
Standard Accessories: Troubleshooting 14
N2QAKB000001
N2QAKB000007
1 remote control
1 RF coaxial cable
1 mains lead
2 batteries, type R6 Index
Specifications 16
Model: Model: OSD = On Screen Display
NV-FJ614 NV-FJ613 VCR = Video Cassette Recorder
NV-SJ216 TV = Television
Please read through all these operating instructions
(especially the safety information) before connecting
or operating the VCR, or adjusting any settings.
VQT9002
Warning and Important Information Safety Information
This equipment complies with European
Please observe copyright laws when recording sound tracks and film. conformity requirements, in accordance with
the conditions of electromagnetic compatibility
and product safety.
For your own safety and to protect the VCR: This equipment complies with the
Do not remove outer cover, to prevent electric shock. There are no requirements of protection class 2.
serviceable parts inside. Refer all servicing to qualified service personnel.
Only transport and set up the VCR in a horizontal position. This equipment complies with the safety
Only connect cables when all the parts of the VCR are switched off. requirements of the VDE
Only clean the outside of the VCR, using a soft cloth and no cleaning fluid. (German Association of Electrical Engineers).
The mains lead must not be used for other equipment.
In case of rapid temperature changes, do not operate your VCR
for minimum 1 hour.
As this equipment gets hot during use, operate it in well ventilated place; do
not install this equipment in confined space such as a bookcase or similar unit.
To prevent fire, electric shocks and damage :
The VCR, the remote control, the mains lead and the cassettes
must not be used if it is damaged. Protect them from:
Insertion of fingers or objects
Direct sunlight, heat, cold, rain, wetness, soiling and dust
Shock and mechanical stress (do not bend the mains lead)
Electric and magnetic fields
Lightning strikes during thunderstorms (disconnect mains and aerial plugs)
Conserve the environment: See Power save on page 9.
Disposal of old equipment:
Batteries, packaging and old equipment should not be
disposed of as domestic waste, but in accordance with
the applicable regulations.
Instructions on inserting Remote Control Batteries:
The lifetime of the battery is about 1 year, depending on the frequency of use.
Do not use one old and one new battery, or different types of batteries together
(e.g. one alkali and one zinc-carbon battery).
Only insert batteries which contain no toxic materials
(such as lead, cadmium, mercury).
Do not use rechargeable batteries (nickel-cadmium batteries).
If the remote control will not be used for a long time, remove the batteries and
store them in a cool and dry place.
Do not heat or short-circuit the batteries.
Remove spent batteries immediately and
replace them with type AA, UM3 or R6.
Observe the and polarities
when replacing the batteries.
2 VQT9002
Connecting and Setting up
Set up the connections shown here, and connect the mains lead (supplied) If you want to connect the TV only VCR
to your AC mains. with a RF Coaxial Cable (supplied),
Aerial you must ensure that the video output
VCR
(not supplied) channel is adjusted to the input channel of
the TV.
TV
RF in For this purpose, please also read the
TV operating instructions for your TV. RF Coaxial Cable
(supplied)
AV
RF out
Switch on the VCR VCR display
RF Coaxial Cable Press the MENU Button for about 7
(supplied)
seconds until the number of the channel
On Screen Display
appears on the VCR display
(the pre-setting is channel 36). VCR
Ch:36
21-pin Scart cable
(not supplied) Tune the TV until the test screen appears.
Note: A distorted picture on the channel can be
The RF (radio frequency) coaxial cable must be connected for TV reception, reduced, by adjusting the VCR and the TV
even if the video recorder is already connected with a 21-pin Scart cable. to another channel.
Use this button to select
Automatic Setting the channel number (e.g. channel 39).
Switch on the VCR On Screen Display
and the [Country] setting menu will appear. Panasonic VCR
Use the cursors on the
Country Tune the TV until the test screen appears.
Belgien Deutschland VCR
remote control to select your country. Belgique