Text preview for : LGchassisMP-015A.rar part of LG LGchassisMP-015A LG TV chassis MP015A LGchassisMP-015A.rar
Back to : LGchassisMP-015A.rar | Home
website:http://biz.LGservice.com
e-mail:http://www.LGEservice.com/techsup.html
COLOR TV
SERVICE MANUAL
CHASSIS : MP-015A
MODEL : PE/PL-43/48/53A82T
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
DIGITAL INDEX
CH: MOVIE SPORTS MUSIC
SPORTS
PRO LOGIC
C
L R
LS RS
CATV
CATV TV /
Sep.,2001
P/NO : 3828VD0096A Printed in Korea
CONTENTS
Contents .......................................................................................................... 2
Safety Precautions ..........................................................................................3
Servicing Precautions .................................................................................... 4
Specifications ................................................................................................. 6
Control Descriptions ...................................................................................... 8
Adjustment......................................................................................................11
Troubleshooting .............................................................................................18
Block Diagram ................................................................................................26
Printed Circuit Board .....................................................................................30
Wiring Diagram...............................................................................................42
Exploded View .................................................................................... 44,46,48
Exploded View Parts List.....................................................................45,47,49
Replacement Parts List ................................................................................ 50
SVC. Sheet .........................................................................................................
- 2 -
SERVICING PRECAUTIONS
CAUTION: Before servicing receivers covered by this service transistors and semicounductor "chip" components. The
manual and its supplements and addenda, read and follow the following techniques should be used to help reduce the
SAFETY PRECAUTIONS on page 3 of this publication. incidence of component damage caused by static by static
NOTE: If unforeseen circumstances create conflict between the electricity.
following servicing precautions and any of the safety 1. Immediately before handling any semiconductor component
precautions on page 3 of this publication, always follow the or semiconductor-equipped assembly, drain off any
safety precautions. Remember: Safety First. electostatic charge on your body by touching a known earth
ground. Alternatively, obtain and wear a commercially
General Servicing Precautions available discharging wrist strap device, which should be
1. Always unplug the receiver AC power cord from the AC removed to prevent potential shock reasons prior to
power source before; applying power to the unit under test.
a. Removing or reinstalling any component, circuit board 2. After removing an electrical assembly equipped with ES
module or any other receiver assembly. devices, place the assembly on a conductive surface such as
b. Disconnecting or reconnecting any receiver electrical plug aluminum foil, to prevent electrostatic charge buildup or
or other electrical connection. exposure of the assembly.
c. Connecting a test substitute in parallel with an electrolytic 3. Use only a grounded-tip soldering iron to solder or unsolder
capacitor in the receiver. ES devices.
CAUTION: A wrong part substitution or incorrect 4. Use only an anti-static type solder removal device. Some
polarity installation of electrolytic capacitors may result solder removal devices not classified as "anti-static" can
in an explosion hazard. generate electrical charges sufficent to demage ES devices.
d. Discharging the picture tube anode. 5. Do not use freon-propelled chemicals. These can generate
2. Test high voltage only by measuring it with an appropriate electrical charges sufficient to damage ES devices.
high voltage meter or other voltage measuring device (DVM, 6. Do not remove a repalcement ES device from its protective
FETVOM, etc) equipped with a suitable high voltage probe. package until immediately before you are ready to install it.
Do not test high voltage by "drawing an arc". (Most replacement ES devices are packaged with leads
3. Discharge the picture tube anode only by (a) first connecting electrically shorted together by conductive foam, aluminum
one end of an insulated clip lead to the degaussing or kine foil or comparable conductive material).
aquadag grounding system shield at the point where the 7. Immediately before removing the protective material from
picture tube socket ground lead is connected, and then (b) the ieads of a replacement ES device, touch the protective
touch the other end of the insulated clip lead to the picture material to the chassis or circuit assembly into which the
tube anode button, using an insulating handle to avoid device will be installed.
personal contact with high voltage. CAUTION:Be sure no power is applied to the chassis or
4. Do not spray chemicals on or near this receiver or any of its circuit, and observe all other safety precautions.
assemblies. 8. Minimize bodily motions when handling unpackaged
5. Unless specified otherwise in this service manual, clean replacement ES devices. (Otherwise harmless motion such
electrical contacts only by applying the following mixture to as the bruching together of your clothes fabric or the lifting
the contacts with a pipe cleaner, cotton-tipped stick or of your foot from a carpeted floor can generate static
comparable nonabrasive applicator; 10% (by volume) electricity sufficient to damage an ES device.)
Acetone and 90% (by volume) isopropyl alcohol (90%-99%
strength) General Soldering Guidelines
CAUTION: This is a flammable mixture. 1. Use a grounded-tip, low-wattage soldering iron and
Unless specified otherwise in this service manual, lubrication appropriate tip size and shape that will maintan tip
of contacts in not required. temperature within the range or 500