Text preview for : Disassembly.pdf part of LG 775FT FB775F-EA Flatron 775FT FB775F-EA
Back to : Flatron 775FT FB775F-EA.r | Home
DISASSEMBLY
1. TILT/SWIVEL REMOVAL 1) Set the monitor face downward. 2) Pressing the latch (a), carefully remove the Tilt/Swivel by pulling it upward. 2. BACK COVER REMOVAL 1) Remove two screws cap (a). 2) Remove four screws (b) from the Back Cover. 3) Slide the Back Cover away from the Front Cabinet of the monitor. (b) (a)
(a) (b) (a)
3. TOTAL CHASSIS ASSEMBLY REMOVAL 1) Disconnect P902(Degaussing pin), P704(DY pin), P501(Tilt pin), P502(Purity pin), P401, P402 and P701, P702, P703 from the Main PCB. 2) Remove eight connect (a). 3) Carefully separate the CDT Board Assembly from the CDT neck. 4) Discharge the remaining static electricity by shorting between the Anode Cap and the CDT ground. 5) Disconnect the Anode Cap from the CDT. 6) Remove two screws (b). 7) Remove the Total Chassis Assembly from the Main Frame.
Anode Cap
DY Assembly screw
(a)
OS D
(a)
SE T
P7
03
(b)
(a)
P701 P704 P702 Control PCB P401 (P201) P402 P501 P502 P902
(a) (b)
-8-
4. VIDEO PCB ASSEMBLY REMOVAL 1) Remove three connect (a). 2) Disconnect P301, P302 from the Video PCB Assembly. 3) Remove screw (b). 4) Remove the Video PCB Assembly.
5. CONTROL PCB ASSEMBLY REMOVAL 1) Remove three screws (a). 2) Remove the Control PCB Assembly from the Front Cabinet.
OS
(a)
P302 P301
D
SE
T
(a) (b) (a)
(a) (a) (a)
6. MAIN PCB ASSEMBLY REMOVAL 1) Remove holder (a). 2) Remove the Bracket Guide. 3) Remove four screws (b). 4) Remove the Main PCB Assembly.
(b) (b) (b)
(b)
(a)
(a)
Bracket Guide
-9-