Text preview for : MQM0058DG210311REV1_Horizontal_Bar_Noise.pdf part of panasonic MQM0058DG210311REV1 Horizontal Bar Noise panasonic Plasma TV TX-PR42G20 MQM0058DG210311REV1_Horizontal_Bar_Noise.pdf
Back to : MQM0058DG210311REV1_Horiz | Home
Confidential
For Authorised Service Agents Only Ref No: MQM0058DG210311REV1
TECHNICAL INFORMATION
A BY D EST H IS N PL SK UA Date 21/03/2011
AL CH DK F I L NL RO SLO FIN Country Reported
B CZ E GB IRL LT P S TR EU
Product Category: Plasma Television / Plasma IDTV
Subject: Horizontal bar noise on screen
Model(s) Affected: All 2010 models
Symptom / Due to component failure (IC9300), either horizontal belt noise, or horizontal dot noise can be
seen on the screen. In some cases both may be visible.
Cause:
(See the figures below for symptom examples)
Remedy / This modification applies to all units prior to serial number: F*-052****
Method: Replace either the A-PCB OR the D-PCB according to the model.
For models fitted with a D-PCB that has IC9300 mounted on it, replace the D-PCB. For all other
models, replace the A-PCB.
Belt noise
Dotted line noise
Fig.1: D-PCB Fig.2: D-PCB
Fig.3: A-PCB Fig.4: A-PCB
Dotted line noise
Fig.5: A-PCB
Fig.6: A-PCB
Belt noise
Warranty Claims - Please use the following IRIS and Activity codes
Activity Codes: Guarantee Status Repair Type Location Source
(UK Only) A X W D
Symptom Section Defect
Condition Repair
IRIS Codes: Area Type Code Area Code Area Code
1 3 4 343 3 VPD 2 N i
Note: Failure to use the correct IRIS and Activity codes may result in the claim being rejected
Document No: MQM_TI
Panasonic 1 of 1 Rev: 10.00 DG220710