Text preview for : HB172_SM_4566945539.pdf part of Philips HB172 SM 4566945539 Philips Household HB 172A HB172_SM_4566945539.pdf
Back to : HB172_SM_4566945539.pdf | Home
Table solarium
HB 172/A
Service
Service
Service
45
50
40
55
35
60
30
MIN
25
0
20
5
15
10
Philips Domestic Appliances and Personal Care
SAP coding HB 172
GENERAL
This solarium is especially intended for the tanning of the face.
The UVA-source consists of 2x2 series connected TL's.
The radiation distance is 10 cm or less.
In connection with this small distance the advice is to wear
protecting goggles during the cure.
HINTS FOR REPAIRS
- After the screws (item A) have been loosened the cover LA1 LA2 LA3 LA4
(item 1) can be removed.
- Starter(s) and lamp(s) can be replaced now.
If one lamp or starter is defective 2 lamps will not burn
because of the series connection.
By changing it can be found which lamp or starter is S1 S2 S3 S4
defective.
- When the reflector has been removed the internal wiring
can be checked.
L1 N
- For the replacement of a ballast the tubular staple must 60 MIN
be drilled out. L
The new ballast can be fastened with a M4 bolt and nut.
L2
TECHNICAL DATA
Input : 75W
UVA-source : 4 x TL CLEO 15W
Radiation area : 20 x 26 cm
Radiation distance : 10 cm
Starter : 4 x S2
Ballast : 2 x 30W
Timer : 60 min./Diehl
Protecting goggles : 4822 690 80072
Output UVX36 meter : >3.4mW/cm2