Text preview for : VR0303701P8.PDF part of panasonic VR0303701P8 panasonic Bullettines Bulletins buleitins new VCR VR0303701P8.PDF
Back to : VR0303701P8.PDF | Home
Order No. VR0303701P8
Model No.: Applicable Models;
All of the model which is printed as "Z-mechanism" on the cover of the S/M.
"Z-mechanism" is printed below of each model number.
Effective From: Apr.1st 2003(Receiving Order basis)
Subject: Supplier Change Notice
Please revise the original parts list in the Service Manual to confirm to the change(s) shown herein. If new supplier are shown, be sure
to use the new sales channel when ordering parts.
Reason for Change
*The manufacturer of Z-mechanism mechanical Ass'y will be changed from Japan to Malaysia(MAV).
1.Improve performance The supplier of the following P/N will be changed from AVC-
2.Change of material or dimension
SPC(JAPAN) to MESA-ASPC(Singapore) due to the above
3.To meet approved specification
4.Standardization mentioned reason.
5.Addition
6.Deletion
7.Correction
8.Other
Interchangeability Code
Parts Set Production
Original Early Original or new parts may be used in early or late production set.
A New Late Use original parts until exhausted, then stock new parts.
Original Early Original parts may be used in early production set only. New parts may be used in early or
B New Late late production set. Use original parts where possible, then stock new parts.
Original Early New parts only may be used in early or late production set.
C New Late Stock new parts.
Original Early Original parts may be used in early production set only. New parts may be used in late
D New Late production set only. Stock both original and new parts.
E Other
Part Number
Ref. No. Original Part No. New Part No. Part name & Descriptions Remarks
VDB1431 ------ ARM BOSS [MAV]
VDG1221 ------ CONVERT GEAR [MAV]
VDR0350 ------ REEL TABLE [MAV]
VED0412 ------ AUDIO CONTROL HEAD [MAV]
VEM0604 ------ LOADING MOTOR,DC 3W [MAV]
VMB3045 ------ SPRING [MAV]
VMD2620 ------ HOLDER [MAV]
VMD2738 ------ WINDOW COVER [MAV]
VMD3379 ------ SIDE SUPPORT [MAV]
VMD3795 ------ FPC HOLDER [MAV]
VML3164 ------ ARM [MAV]
VML3165 ------ ARM [MAV]
VML3166 ------ LEVER [MAV]
VML3167 ------ ARM [MAV]
VML3172 ------ ARM [MAV]
VML3176 ------ LEVER [MAV]
VXA5746 ------ HOLDER UNIT [MAV]
VXA5854 ------ BASE UNIT [MAV]
VXA6040 ------ INCLINED BASE [MAV]
VXA6540 ------ SIDE PLATE,PLASTIC [MAV]
VXA6607 ------ SIDE PLATE,PLASTIC [MAV]
VXA7421 ------ SIDE PLATE,PLASTIC [MAV]
VXL2667 ------ ARM UNIT [MAV]
VXL2669 ------ CLEANER ARM UNIT [MAV]
VXL2670 ------ S BARKE ARM(B) UNIT [MAV]
VXL2672 ------ ARM UNIT [MAV]
VXL2733 ------ S BARKE ARM(B) UNIT [MAV]
VXL2747 ------ LOADING RACK UNIT [MAV]
VXL2785 ------ PINCH ARM [MAV]
VXL2792 ------ IDLER ARM [MAV]
VXL2793 ------ TENSION ARM UNIT [MAV]
VXL2996 ------ ARM [MAV]
VXP1730 ------ MAIN SHAFT UNIT [MAV]
VXP2035 ------ CENTER CLUTCH [MAV]
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not con-
tain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by elec-
tricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt
with in this service information by anyone else could result in serious injury or death.
2003 Matsushita Electric Industrial Co., LTd.
All rights reserved. Unauthorized copying and
distribution is a violation of law.